Jump to content
SAU Community

R34 Gtt Turbo Upgrade Help

34sharker
 Share

Recommended Posts

34sharker Explorer

34sharker

Posted
Posted

Hey guys only recently blew the standard turbo on my 34 gtt, i was going to just keep it off the road until its sent away for the build but i want to get it back on as i dont want all my rego going to waste plus its extremely sad seeing it sit there and not move...but anyway

Ive had no experience with upgrading into a smaller turbo class with the rb25s/neos etc...so was wondering if anyone could point me in the right direction as to what would be a good choice as a straight bolt on to the original manifold/dump etc i want something with a little more punch than the standard turbo as i want to run a bit more boost for the time being so any help as to what would be ideal to throw on and make a little more power and not have to go through a drastic tune or at least be relatively driveable once i bolt it on.

Thanks. B

Link to comment
https://www.sau.com.au/forums/topic/367108-r34-gtt-turbo-upgrade-help/
Share on other sites
Thelen Rising Star

Thelen

Posted
Posted (edited)

Just get GCG to rebuild and hiflow it. Stock so no problems with cops etc, and will handle all the boost you throw at a stock engine. I realise you say you don't want to waste rego and wait while its sent away, but a rebuild will only take <2 weeks, which is how long it will take you to uhm and arr over what turbo to get and then find the money. Rebuilds are cheap, new (or even used) aren't and if something is mismatched you'll have even more downtime.

Edited by Thelen
34sharker Explorer

34sharker

Posted
  • Author
Posted

Just get GCG to rebuild and hiflow it. Stock so no problems with cops etc, and will handle all the boost you throw at a stock engine. I realise you say you don't want to waste rego and wait while its sent away, but a rebuild will only take <2 weeks, which is how long it will take you to uhm and arr over what turbo to get and then find the money. Rebuilds are cheap, new (or even used) aren't and if something is mismatched you'll have even more downtime.

Ive actually been told to do the same thing over my other thread and thanks alot for the reply, the engines got more than enough to handle the hiflow route so i think i may do that but yeah its only been recently rego'd i dont mind when its off getting the 2month build done but now its just like i said depressing but thankyou ill get onto someone asap about the hiflow and rebuild

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • blind_elk
      Wheel refurb?

      By blind_elk · Posted

      The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Bit wet, but YUMMY
    • GTSBoy
      Pops when backing off throttle, rough-ish sound through rev range.

      By GTSBoy · Posted

      Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • Duncan
      Pops when backing off throttle, rough-ish sound through rev range.

      By Duncan · Posted

      It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • AdiR34
      Pops when backing off throttle, rough-ish sound through rev range.

      By AdiR34 · Posted

      Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...