Stripping Interior Tips

[RBSkyline]

Hey guys,

I am stripping my R33 S1 GTS-T ready for track. I have stripped the boot, parcel shelf, rear seats and unbloted the seatbelts no im am alittle stuck as to how the rear side trims all come off... I don't want to break anything so is there a trick to it at all because I cannot see screws or clips...

Any help would be much appreciated.

[Craved]

gets a bit tricky as the front seat belts go through the side rear trims.

there is a screw in the small pocket where the belt runs through the panel, thats the only one per side - so unbolt that screw and the main bolts for the upper belt and then just pop the clips on the panel like you would on the door trims

[RBSkyline]

I have unbolted to seat belts as they are coming out also. So i have to find that screw first..... and clips you say.... so i have to give the panels a good pull? do i take the top part off first or the bottom panel off first (near the bottom of the rear seat?)

[Craved]

bottom panel first

yep, just pull on the panels as close to the clips as possible

screw should be obvious behind the seat belt as it passes through the panel

[RBSkyline]

Ok mate I will give it ago, please check in on this topic I will post updates