Where Are The Coilpacks?

[Grey]

Where are the coil packs located on the NEO-RB25DE, is it where I circled in red? Do I have to take the cover off and it's just under it remove hosing and stuff to get to it?

Edited June 13, 2011 by Grey

[Shazza24]

Where are the coil packs located on the NEO-RB25DE, is it where I circled in red? Do I have to take the cover off and it's just under it remove hosing and stuff to get to it?

yes the cover will have to come off, the coil packs should be in the valley between the cam covers/cams.

[Grey]

so just underneath where i circled in red?

[Shazza24]

No, more like where i have circled in red. The x over pipe may be in the way also and there could also be another cover over the valley itself.

EDIT: found a pic of a neo turbo with covers off. Same stuff, slightly different bucket.

Edited June 13, 2011 by Shazza24

[Grey]

ah okay thanks heaps!

[Shazza24]

no worries.

[mystery_kid]

what is with that funky split in the pipe after the throttle body?

[gotRICE?]

what is with that funky split in the pipe after the throttle body?

The top one is an N/A motor, so my assumption would be an extension of the runners for more torque perhaps?

[Grey]

i dont know its not my car, i was just using the picture as an example so i could find the coilpacks in my car remove and change them and while im at it change the spark plugs

[MrStabby]

what is with that funky split in the pipe after the throttle body?

Probably to help even out air distribution to each cylinder.

[mystery_kid]

ah N/A i'd never seen in the engine bay of an N/A r34 before then lol

fair enough

[Grey]

No, more like where i have circled in red. The x over pipe may be in the way also and there could also be another cover over the valley itself.

EDIT: found a pic of a neo turbo with covers off. Same stuff, slightly different bucket.

hello shazza do i have to remove the hoses and bits marked in red to get to the coilpacks marked in green? is it like lego or does it require a lot of skill?

Edited June 15, 2011 by Grey

[Shazza24]

hello shazza do i have to remove the hoses and bits marked in red to get to the coilpacks marked in green? is it like lego or does it require a lot of skill?

Being different to the turbo model, i would say that you have to disconnect/ remove the things you marked in red....

In terms of skill, not much is required. Just make sure you remember where everything goes!

http://www.skylinesaustralia.com/forums/topic/122284-r34-replacing-spark-plugs-on-neo6-rb20de-rb25de/page__p__5311921__hl__coil+packs__fromsearch__1#entry5311921

Found the above thread it should answer any and all questions....

[Grey]

thank you heaps youve been a great help, appreciate it!! =D

[Grey]

Being different to the turbo model, i would say that you have to disconnect/ remove the things you marked in red....

In terms of skill, not much is required. Just make sure you remember where everything goes!

http://www.skylinesa..._1#entry5311921

Found the above thread it should answer any and all questions....

i've successfully taken it apart and put it back together for reassurance, now do i need to put silicon over where the spark plugs where the coilpacks fit on? for better durability?

[Miguelone]

Wow 34's have a lot more piping and bullshit going on up there than 33's

[Grey]

haha yeah

[Shazza24]

i've successfully taken it apart and put it back together for reassurance, now do i need to put silicon over where the spark plugs where the coilpacks fit on? for better durability?

How so, grasshopper??

Normally you would silicon old coil packs, if they were starting to degrade and causing misfire...

EDIT: but that is just a temporary fix

Edited June 19, 2011 by Shazza24

[Grey]

okay thanks for all your help!

[Shazza24]

okay thanks for all your help!

Don't put silicon between the plugs and coils...

Edited June 19, 2011 by Shazza24