Jump to content
SAU Community

Recommended Posts

Hey guys,

Just want to know if any one notices water leaking inside the cabin, or is it just mine.

Its not exactly leaking but the carpet is damp, where the passengers left foot would be if there was someone sitting there. I looked under and couldn't see any signs of water.

Something to note though, i did recently get my stereo installed and they did replace the battery and ran some cabling around that area.. please refer to the below pic.

Do you think where the cable is run - top left of the picture is where the water may be getting in?

battery.jpg

Link to comment
https://www.sau.com.au/forums/topic/367763-car-leaking-water-inside-cabin/
Share on other sites

I've run a heap of wires in the same place in my M35 & not had any water get into the car, even when driven in really heavy rain. Having said that, it probably is the cause of the leak, especially if the plastic trim that sits against the windscreen isn't totally flush with the glass. The water could happen to drop straight down the cut they've made in the rubber boot. Nothing some silicon won't fix though :happy: . Good luck.

Mate I've got the EXACT same issue. Water leaks into the cabin and gathers in the left rear passenger's footwell.

I had LPG installed a few months ago and they ran some hoses along the firewall area...I wonder if that's the culprit. The leak only occurs in very heavy rain...

I don't think my cover is missing, but perhaps something there is allowing water to get in? Hmmmmm

if I am looking at that correctly I reckon that the grommet has been cut and that the cable is forming a channel for the water to run inside.

I would take it back to who did the work on it and tell them you think you have a leak and get them to look at it. (looking at it I *think* I know who did the car.)

last one of those I did I put a 4 AWG cable through the end of that grommet neatly and resealed it with black sickflex. you can pull that harness down a fair bit and the grommet end will expand a fair way to allow a cable that size into it.

this should show what I am talking about

post-2209-0-30696700-1308134461_thumb.jpg

that entire harness has been pulled out , stripped and reassembled. it does not leak. compare that to yours :)

yeah the more i look at it the more i'm thinking that's the culprit.

I might pull things apart and give it a dose of sikaflex. If i still have leaks then ill take it to the workshop that did the install which i'm sure will be more then happy to help.

Chris - the fuses sit to the left of the engine bay mounted on a piece of perspex.

Be careful of touching it, then going into shop. They may knock it back.

Also sorry, but where is the fuses? They should be as close to the battery as possible, if you have a short between the battery and "to the left side" of the engine bay, you will be in a world of hurt.

Edited by omp

part of the reason I pointed it out. I can see the factory terminal low right corner but IF that battery moved an inch to the righ then that car is going to go up in flames. sorry but looking at it from my POV thats what I see. those batteries pack a fairly strong punch when shorted..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...