Jump to content
SAU Community

R32 Gtr 880Hp Manualised Auto

jabr32
 Share

Recommended Posts

jabr32 Newbie

jabr32

Posted
Posted

PUMDU has been built by some of Australias most prestigous automotive workshops(Detail FX,National Automotive,Jakes Performance,TCE Converters,Wollongong Automatics,Fyshwick Head Services,Fitzpatrick Speed Works), fully engineered & i challange you to find a quicker genuwine street car on the road!Body is in great condition with no repairs and recently detailed/buffed.Interia has leather seats and door inserts & red suede head lineing & boot. A half cage(painted) with removable intrusion bars and harnesses (ANDRA Teched) inside the car. It also has working climated control and aircon.The drivetrain consists of a 4speed (transbraked engine & braking) 4wd manualised auto and 6500rpm stall converter. Also has an explosion proof flex plate.The engine consists of a RB30 bottom end, Rev Rods(ARP2000 Bolts), Arias pistions (9.2:1), Kings bearings & ARP Main studs. The RB26 Head has been ported with JUN 272 in. and ex. Cams and all new components from Supertech in the USA (Double Springs,retainer,1mm oversized valves both in. and ex., bronze guides). On the outside it has a high mount stainless manifold with a Borg Warner custom made turbo,tial wastegate and a 4" exhaust . The orginal oil pump has been replaced by an external peterson pump driven of a Ross custom balancer and going through a remote system1 oil filter. The inlet has a 180mm Apexi Intercooler with twin Turbosmart BOV. 1000cc inj,aeromotive reg, billet custom rail, twin 044 fuel pumps & custom made surge tank.The car is controlled by APEXI PowerFC with hand controller and E-Boost 2 in car. The car has two tunes for C-16 (880hp on 18psi) and on pump fuel (610hp on 14psi) the car was proudly tuned by Jakes Performance. 19x9.5 Rays G-Games wheels 265/35 rubber front/rear and ARP wheel studs front and rear. 8spot calipers front with 365mm rotors.Im sure ive forgotten something so please ask questions price is$52500 neg. comes with all parts i have... it is a regretfull sale as ive bought a house...

Any questions please dont hesitate to call rather than email or pm

cheers

Link to comment
https://www.sau.com.au/forums/topic/367764-r32-gtr-880hp-manualised-auto/
Share on other sites
gtrsrule Explorer

gtrsrule

Posted
Posted

PUMDU has been built by some of Australias most prestigous automotive workshops(Detail FX,National Automotive,Jakes Performance,TCE Converters,Wollongong Automatics,Fyshwick Head Services,Fitzpatrick Speed Works), fully engineered & i challange you to find a quicker genuwine street car on the road!Body is in great condition with no repairs and recently detailed/buffed.Interia has leather seats and door inserts & red suede head lineing & boot. A half cage(painted) with removable intrusion bars and harnesses (ANDRA Teched) inside the car. It also has working climated control and aircon.The drivetrain consists of a 4speed (transbraked engine & braking) 4wd manualised auto and 6500rpm stall converter. Also has an explosion proof flex plate.The engine consists of a RB30 bottom end, Rev Rods(ARP2000 Bolts), Arias pistions (9.2:1), Kings bearings & ARP Main studs. The RB26 Head has been ported with JUN 272 in. and ex. Cams and all new components from Supertech in the USA (Double Springs,retainer,1mm oversized valves both in. and ex., bronze guides). On the outside it has a high mount stainless manifold with a Borg Warner custom made turbo,tial wastegate and a 4" exhaust . The orginal oil pump has been replaced by an external peterson pump driven of a Ross custom balancer and going through a remote system1 oil filter. The inlet has a 180mm Apexi Intercooler with twin Turbosmart BOV. 1000cc inj,aeromotive reg, billet custom rail, twin 044 fuel pumps & custom made surge tank.The car is controlled by APEXI PowerFC with hand controller and E-Boost 2 in car. The car has two tunes for C-16 (880hp on 18psi) and on pump fuel (610hp on 14psi) the car was proudly tuned by Jakes Performance. 19x9.5 Rays G-Games wheels 265/35 rubber front/rear and ARP wheel studs front and rear. 8spot calipers front with 365mm rotors.Im sure ive forgotten something so please ask questions price is$52500 neg. comes with all parts i have... it is a regretfull sale as ive bought a house...

Any questions please dont hesitate to call rather than email or pm

cheers

any pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom · Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...