Jump to content
SAU Community

Recommended Posts

So its like this...I have a bunch of bits on my r33gtst. Z32 afm, power fc, datalogit, wideband stuff, 900cc injectors, big ass frontmount, hd clutch, beasty fuel pump, stock turbo at 14 psi. So the next bit for power is the turbo eh?! Anyway later this year I'm getting a tough rb25/30 built (forged rods and pistons and bunch of other crap). I'm looking at getting a gt3582r for the new motor and the question is this (drumroll) Should I wait till the rb30 arrives or should I get the gt3582r setup now?? Reason I ask is I really want more power now without being scared of the stocker shitting itself but I can wait if I have to. I dont want to buy a smaller turbo that suits the 25 when I'll just have to buy another one for the 30 in less than 12 months. Any ideas appreciated.

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/
Share on other sites

I would wait

but you can still do it...just depends on whether you want to pay for tuning twice, 2 dump pipes (RB30 one needs to be longer) etc

GT35 wont be the most responsive thing on a stock 25 but plenty of peoole still use them.

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867374
Share on other sites

Cool sounds good. Yep I'm tuning with the missus in the passenger seat keeping an eye on things while I drive and give her directions regarding the tune. The dump doesn't matter cos a mate at work will do it for a few the sphincter of the universes on the weekend. I was pretty much going to do it but just needed a couple more opinions for the affirmative.

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867419
Share on other sites

Haha :) We are pretty safe on all fronts really. She only does changes to the tune that I tell her to do so that's all good there. Also she doesn't like driving the skyline much. Its not comfortable enough for her. And I cant get her to floor it, not that I really blame her.

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867578
Share on other sites

:woot: I would but she ain't that silly. I constantly teach her about cars even when she's not listening and she is quite aware of what the gt35r will do. She was scared to drive a pulsar et turbo I used to have with a t25g on it. Plus she has a hyundai accent. Needless to say it is slow as shit. Anyway gotta head, work early and all that bizzo. Cheers for the ears and chat. :D
Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867616
Share on other sites

Cool sounds good. Yep I'm tuning with the missus in the passenger seat keeping an eye on things while I drive and give her directions regarding the tune. The dump doesn't matter cos a mate at work will do it for a few the sphincter of the universes on the weekend. I was pretty much going to do it but just needed a couple more opinions for the affirmative.

your mate has an odd payment plan lol

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867678
Share on other sites

I tried that whole thing already with the missus driving but it didnt work....couldnt get her to hold it steady in one cell for shit!

Anyway slap the 35R on there and done with it.....I'm guessing it will be a 0.82 turbine which will be a little laggy, but should be lots of fun after 4500ish

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867706
Share on other sites

way i see it you have 2 choices

HEADS... bolt it on now and have fun blowing up the rb25 ,it would give you some practice on setting it all up so most mistakes will be made now, then when you go to change engine you will have a few tricks up your sleeve already..also gives you a chance to get used to the power gradually instead of a heap all at once..

Besides the 25 might last quite a while and you wont need to put the 30 in just yet..

Or

TAILS.... keep the stock 25 and all its bits.. If you want to sell it down the track u could chuck the original engine back in .. And sell the 30 seperate or if you kill the 30 you have a spare engine u can chuck back in..

now flip a coin :D

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867718
Share on other sites

good luck telling your missus how to tune while you are driving.

You simply cannot tune without being absolutely focussed on the map. You can't do that because you are driving. So how are you gonig to be able to tell her what to change?

Umm.. This is an accident waiting to happen.

My suggestion - If you know how to tune, get someone that can drive to drive.

If you don't know how to tune and think its just a simple thing like taking a piss - Then I can only wish you luck.

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867811
Share on other sites

i've done it heaps of times, aslong as your not tryna make huge changes while your driving its fine. just use the logs after the drive to make adjustments. best thing to teach the mrs is to let you know is theres anything out of the ordinary (too lean, knock etc).

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867937
Share on other sites

For starters I've tuned 600 hp na 5L engines with motec and autronic. Example of the missus and me tuning; I say watch the knock and tell me when it starts to go up. She says ok. I floor it and when and if it starts to go over about 20 she says so and I back off and see what rpm it was and adjust timing by 1 or 2 degrees. If there is no knock then 1 degree gets added to the whole line. FYI My missus is a qualified teacher and is smarter than 94% of people out there according to her uni results. I reckon I'm doing pretty good for tuning :thumbsup: . I'll make a quick clip this afternoon and post it on youtube and link it here so doubters can see. and post a pic of the max knock and afr lol. No luck here, only years of XP :rofl:

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5867944
Share on other sites

Dyno time would be alright. A dyno is a lot safer for tuning, ya can only legally floor it in second before the speed limit. Here is a quick run I did before the wideband and datalogit. I cant get a new one to upload for some reason. Its about 14 psi dropping to 12ish. The shift light is set to 6500 rpm. When I checked the afrs from the tune in the video it was real low, about 9.8 to 10 ish. It's leaner now and going a lot better but bear in mind its a stock turbo so it is what it is. Oh I forgot to mention in the opening post that the exhaust is done too. I'll try get a new vid uploaded soon.

http://www.youtube.c...h?v=zvhEyMZNIs8

Link to comment
https://www.sau.com.au/forums/topic/367867-need-advice/#findComment-5869353
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Save yourself the headache of an alarm. Immobilizer on the signal side of the main EFI relays so it won't start is good enough. DIY killswitch is the same thing except instead of a nice passive system you need to remember to switch it on and off.
    • Yeah, the advent of canbus was supposed to cut down on wiring weight, then some bright marketing wonk says "oh, look at all these wonderful tech gadgets we can cram in here now that we have this wonderous technology" and some arsehole safety legislator says "oh, look at all the wonderful surveillance and tracking gadgets we can cram in here now that we have this wonderous technology" and some dipshit young engineer who has grown up thinking that an extra 500000 lines of code is not a problem because storage is cheap these days says "oh look at all this wonderful shit I can do to one up those dipshit arsholes over at VW" and the Karens of the world all go "oh look at all these fancy things I can do on my screen (so long as I am not driving on a bumpy road wherein touch screens immediately become the single most stupid shit idea ever shoveled into a car) and my 19 zone airconditioning keeps my sweaty fat folds a bit less damp and the windows close themselves because I'm too fat and lazy to wind them up for myself and these reversing sensors would have been great if I'd paid attention to them instead of smashing them on the bollard while I was reversing and staring fixedly forward that day I went to pick up little Charlize from ballet" and the sweaty mongoloids who say "oh this wonderful collision avoidance technology with these 45 excellent radar antennae scattered across the front of my car mean I can tailgate like a methed up tradie at full speed with no fear because the car and the 35 airbags will protect me if it all goes wrong" ...... </shallistopranting?>
    • There's a post from a member (can't recall who), went down the path of a twin scroll G30-660 and it's doing over 300kW+ AND comes on about the same as a high flow RB25DET turbo. Have your cake and eat it too in this case. TBH, if I had a 2nd chance of building my car again (i.e. someone gave me what I wanted for my shit box, but the deal was I had to re-build another R33 and keep the change) I would just pop in a stock NEO motor (with new seals, rod bearings, ARP studs, head gasket, sump, Nitto pump), get a smaller twin scroll turbo, modify the stock low mount (keep the divider in place), and make a solid 300kW on 98RON and call it a day. 
    • It's all the sound deadening, and extra shit piled into them, plus all the extra (even though it's thinner) material for crumple zones. I can't fathom in modern cars why they need canbus to the headlights, and why the headlights must be vin coded on some cars to the ECU, BCM, and security module! Especially when they claim it's for security, yet, the canbus at the headlights let's thieves steal the car in minutes, so even more cars are being stolen! The Mercedes Sprinter 907 vans. They're a huge van, but a "basic" van. Yet they have that many canbus networks, plus two Lin networks, AND an Ethernet network. Logging a single network alone of 8 byte data frames, and they will generate a 20mb log file in 5 minutes. That's one network, and I can't remember the exact amount, but there's over 10 full CAN2.0B networks in them. I'm not a fan of modern cars, oddly, more and more I hate DBW, and all the bullshittery the cars try and interfere with. But all that bullshittery adds weight, plus crazy regulations on crumple zones, plus, ever picked a modern seat up, half of them have like 4 electric motors in them and will weigh 30+kg each. Then all the motors for things like adjustable steering columns blah blah blah. And did I mention the sound deadening so you can even hear an ambulance right behind you even if you 7.2surround sound is off?
    • Ah ok, yeah it should be flat, I believe the r34 battery tray has these 3 bumps in them they makes it line up and everything is flat, don't see how it would tilt if everything is secured.
×
×
  • Create New...