Jump to content
SAU Community

Recommended Posts

I have an r32 gtr doing a bit of hill climb with it. I have a brand new set of kumho ku36s on it and it does nothing but understeer. Just wondering everyones thoughts and help. Obviously i will in time be getting a set of r spec tyres but wondering if there is anything i could do in the mean time be it sway bars or what ever. i do have different sway bars all round. Any help or info would be great

Link to comment
https://www.sau.com.au/forums/topic/368184-r32-gtr-under-steer/
Share on other sites

There is a whole binch of things that can induce and/or reduce understeer.

Try inflating the front tyres about 2-4psi above the rears.

I have a GTS4, and found that a heavy rear bar, combined with the standard front bar, was good for a neutral to slightly oversteering car.

Do you have any -ve camber in the front? Try taking some -ve camber out of the rear.

What spring rates are you running?

Also, try adjusting driving style. If you are braking as you turn in, then the car is more likely to understeer as weight transfers to the front outside tyre.

Also, checkout your front to rear ride height. 5-10mm difference can make quite a difference to how the car handles into corners.

+1 you want the wheel centerline to guard measurement to be 10mm higher at the front. Most people recommend 350mm front 340mm rear. I used to have 335mm at the front and raising to 350 made the suspension work a lot better. One you've got the ride height about right you should get it corner weighted and aligned. IIRC i'm using about 2deg negative camber at the front and 1.25 negative at the rear. Make sure you dont have any toe in at the front, or at least less than you have at the back. I'm using zero toe at the front and haven't had tramlining with either Falken rt-615s or Federal 595RS, which are similar styles of tyre to your Kumhos.

You WILL need a stiffer rear sway bar - makes a huge difference, and if you get an adjustable its easy to play with the under/over-steer balance.

EDIT: oh i see you have sway bars already - your front one may be too heavy, which will make understeer worse.

Changing the tyres is a waste of time until you get the front/rear balance right, and to make R specs work properly you need more aggressive alignment settings, which will mean more tyre wear for road use.

I have an r32 gtr doing a bit of hill climb with it. I have a brand new set of kumho ku36s on it and it does nothing but understeer. Just wondering everyones thoughts and help. Obviously i will in time be getting a set of r spec tyres but wondering if there is anything i could do in the mean time be it sway bars or what ever. i do have different sway bars all round. Any help or info would be great

Five questions:

So you have four tyres the same?

What sway bars have you got?

What spring rates are you running?

What alignment settings do you have?

What diffs are in the car?

Generally to reduce understeer you will need more rear roll stiffness & less front. Which you can do with springs/sway bars/ride heights. Also the way you drive it makes a huge difference. On the other hand changing four tyres for a different compound shouldnt change the balance much if at all.

Lastly check that the drop links to the sway bars are done up properly. A loose rear bar will give you massive undertsteer...

Fender braces make a world of difference too.

To what? I mean, other than your bank account.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @soviet_merlin Thanks mate!  Nothing too major but will hold me up for a while. I've got lymphomas to get taken off the back of my neck and the middle of my spine which always conjures scary thoughts!  It sounds worse than it is. Yeah great, conjuring more rabbit hole deepening , just what I need! 🤣  
    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
×
×
  • Create New...