Jump to content
SAU Community

Recommended Posts

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst
Link to comment
https://www.sau.com.au/forums/topic/368341-r33-gtst-performance-parts/
Share on other sites

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Hey mate of memory the microtech lt12s didnt need its own map sensor it uses the cars standed sensors .It dosent use the airflow meter so u can remove that and it comes

with the plug and play adapter for a skyline loom.So as simple as plug it in hook 1 manifold presure line then drive it to tuner

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700 SOLD

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600 SOLD

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...