Jump to content
SAU Community

Recommended Posts

Hi all,

just wondering if anyone knows how much a coil pack is worth new from Nissan. I intend on calling Nissan tomorrow to find out but if someone knows here, that might prepare me for the shock when I call in the morning. My car developed a problem over the weekend and it's running a bit rough so I decided to check the plugs this afternoon. Rather than take the 2 racks off that the coil packs sit on I just un-did the bolts that hold the coil packs onto that rack. I started the car with the loosened coil packs sitting on the plugs and pulled 1 coil pack off at time, 1 after the other. I always had 5 cylinders running at a time. As you pull the coil pack up it "arcs out" on the head. Each coil pack "arked out" with similar behavior except for 1 which did not "arc out" much at all. I then swapped the coil pack with another one just to make sure it was not the wiring loom. I figure cause it's behaving differently to the rest it may be the problem. Is this a fair assumption ????

I'll be checking prices with Nissan in the morning and I'll update this thread with the price.

TRADE PRICE FROM HORNSBY NISSAN for COIL PACKS ARE $194.00 EACH

Link to comment
https://www.sau.com.au/forums/topic/36844-how-much-are-coil-packs-worth-new/
Share on other sites

if you live anywhere near castle hill we maybe able to help each other by swaping coil packs . mine started missing at high rpm 6500+ but only when the engine gets very hot say after u drive for 30 min + hard driving . i suspect that i have a coil that breaks down .

i tested them all but by the time i get them off the car they probably cool down enough so they all test ok . after taking all spark plugs out i noticed number 4 being a little blacker than the rest so i suspect thats my problem coil pack .

the other thing that could be is the igniter thats why i'm keen to do a swap with a known good coil before i go and buy 1 .

so blukie let me know if u want to do the swap that way we both will be sure and then we can buy new ones . i can get them trade price as well .

BTW - forget the workshop manual test of measuring resistance across the terminals to determine the shot coil.

I've had plenty of bad coils "pass" this test. Substitute one at a time with a known good unit and go for a thrash (is full boost) to determine which one is playing up.

If you have more than one coil failure - replace them all as they are all probably shot due to age, overheating etc.

True - not cheap, although they're coming down in price now (around the $750 mark). I spent so much time messing around with mis-fires and being caught out with sh!tty coils on cruises, track days etc that I bit the bullet.

Keep your original coils and sell the SPlitfires off separately when you sell your ride. Should still be able to get a half decent price for them used (I know I couldn't find any used ones!)

I suggest before any purchases to read this thread

http://www.skylinesaustralia.com/forums/sh...ead.php?t=32356

it has helped my misfire problem and its been months. I also had the spark arc out of the coils its all fixed now.

True - not cheap, although they're coming down in price now (around the $750 mark).  I spent so much time messing around with mis-fires and being caught out with sh!tty coils on cruises, track days etc that I bit the bullet.

Keep your original coils and sell the SPlitfires off separately when you sell your ride. Should still be able to get a half decent price for them used (I know I couldn't find any used ones!)

Why? Spitfires are total overkill in a fairly mild street car.

There are coil packs that come up on here every so often, and a wrecker may be able to help you out. Just make sure you get the right type as they are different between the series 1, and series 1.5 onwards due to the slightly different ignition setup on each.

Failing that, check this thread: http://www.skylinesaustralia.com/forums/sh...ead.php?t=29852 contact dAVE and pray he still has the ones you need :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...