Td06L2-20G Setup For Rbs

[Roy]

I had this kit for sale about 12 months ago and a friend grabbed it off me for his R32. The direction of his build has changed and no longer will be using it....so back up for sale.

Firstly some pics of the turbo...

Here is the pick of the 55,000km old Greddy manifold

A close of of the two minor repairs i have done to the manifold over the years...

Dump and "Stuff" that the kit comes with...

The below dyno is on my std RB20, std inlet and cams, head etc. Unopened engine. This was a track tune so there is another 10-15rwkws in it of you have a built motor, an RB25 that can spin it easier or you are only driving on the street so never stress the engine with high heat and loads like you get at the track

The manifold and gate came off my car when i replaced it with a 6boost manifold. I was expecting improvements in reponse and power with the 6boost but in reality the Greddy manifold appears to have offered slightly better performance. It does have small hairline crack on one of the hard to access welds, it has been this way for a while and never got worse or affected performance or was audible.

Regarding the turbo, I purchased it off yahoo about 18 months ago. To the best of my knowledge it runs no problem, but I personally have not run it. I purcahsed it as it is an L2 version of the TD06 and I currently run a plain TD06 version. People claim the L2 is more responsive but I never bothered to find out. The plan was to have the turbo rebuilt with a ball bearing core to see if it offered an improvement in performance over my current setup...but after the 6boost manifold, plazmaman plenum install all of which cost me money and for the resultant loss in performance....i cant be stuffed with more experimenting,

So all up for sale, asking $1850. Kit is currently at friends place in Brisbane, can post to metro major cities for about $60-80

[Layby]

Awesome turbo n kit !! Just wish it was for s15 I would come snap it up now !! Good luck shouldn't b hard to sell

[appsy]

How much boost did you make 260kw with ?

[Roy]

According to the graph i posted it was running 20psi dropping to about 19psi

[Benji82]

Can this be low mounted on the standard manifold Roy?

[Roy]

Sorry, not a hope it hell of getting it down there on the std manifold, wrong flange, no gate etc etc

[Roy]

If this doesnt sell before I go OS in 10 days time then i may go back to getting the turbo high flowed with a ball bearing centre

[Roy]

For $500ono I will do the manifold, gate, dump pipe and oil lines for anyone wanting to run off and buy something like this for new.

http://www.ebay.com.au/itm/Turbocharger-Kinugawa-T67-25G-Trust-3-Bolt-8cm-Housing-/280694746061?pt=AU_Car_Parts_Accessories&hash=item415ab5ebcd

For results with the above ebay turbo...

http://www.skylinesaustralia.com/forums/topic/345095-another-r32-money-pit/page__st__20

Makes for a bargain 320rwkws turbo package. Seems to work well on an RB25, would not relaly hit full boost to 5,000rpm on an RB20 but would make 290-300rwkws

[white32]

This kit is pure awesome! how laggy on a rb24 built motor? would I be getting any boost before 4000rpm or would I be stuck in lag town?

[Roy]

Well the TD06-20G in 3rd and 4th gear is hitting 18psi wel before 4,200rpm. On an RB24 it would be better but still not really getting up and going before 4,500rpm. All RBs only boogie after 4,500rpm, irrespective of what turbos are doing before hand. (IMO)

The T67 is a popular RB24 turbo. Just about all the RB24s you see coming our of Japan have T67s strapped to them so that suggests they are a resonably well proven recipe

[Ezekiel86]

Do still have bro? Pm me!

[talky]

Will you separate the gate??

[Roy]

Sorry peope all sold