R32 Suspension, Coilovers Or Aftermarket Shocks. Cheap Preferebly! ;)
By
madmaxx21,
in South Australia
Announcements
-
Similar Content
-
-
Latest Posts
-
By latino_R35 · Posted
Yeah saw that video on YouTube. But he got a R grade (repaired) high mileage model and proudly advertised the fact it was super cheap and no doubt with issues. I wouldn't be going the cheap and nasty route. -
I don't really know general street pads too well, but there is no reason you can't get a low dust, long wearing, no squeal pad that works for those calipers at a reasonable price....they would just be a low end to medium price daily style pad. If new pads don't have much bite or they loose it over time, it is probably just the pad glazing up which you can fix by giving them a good thrashing every now and then (or get the mechanic to deglaze them at next service) Track or semi track pads are where you have to put up with excessive dust (and potentially squealing as a side effect of that) in return for good bite and performance when very hot. Street pads have nothing like that sort of punishment, even long downhills with the brakes on are easier than a track session -
lol yeah I'll check that, reminds me of the LDV thread! I don't think that is the problem here, the starter doesn't even solenoid click. I did do a super quick test by removing the starter motor's power cable from the engine bay fuse box and the battery voltage was still 10v, so something super fishy is going on. BTW here is a R33 fuse box table I threw together from a few sources....use at own risk! R33 Fuse Box and Sources.xlsx
-
By Dose Pipe Sutututu · Posted
Johnny's approach, throw all the Nissan electronics into the trash. Best thing I've done to my shit box, go DBW. -
By Dose Pipe Sutututu · Posted
Sounds like the JAX guys must have installed some really awful pads, are they BenShit/BenDicks pads by any chance?
-
Recommended Posts