Jump to content
SAU Community

M35 Stagea Advice

jasevr4

By jasevr4,
in Four Door Family & Wagoneers

 Share

Recommended Posts

jasevr4 Mentor

jasevr4

Posted
Posted

Hi Everyone,

Been ages since I've posted on SAU - sold my last Stagea years ago and have been living overseas since.

So we're returning back to Australia in a fortnight and I'm looking into car options. The M35 is looking like a solid choice, but I was just wondering if someone could find the time to answer a few questions...

1. Is there a good guide somewhere that describes the differences between all of the different models?

2. Is the body styling specific to the model or were they factory options? I want the front bar with the two lower lamps in each side of the "mouth", and also the small rear wing. (As per this car > http://www.stanceworks.com/forums/showthread.php?t=9060)

3. What common problems do they have?

4. I don't think I want HICAS, but I could be wrong. Just seems like something else to go wrong. Should I reconsider?

5. I read somewhere that it is possible to convert the SatNav/etc system to English in these. Is there a thread about this somewhere?

6. Any differences between the years that I should look out for? I'm only interested in the VQ25DET (not even sure if the VQ35DE is eligible for import anyway)..

Any other advice? Pretty stoked that I looked into the M35's again, they are a great looking package for the money.

Cheers fellas!

Link to comment
https://www.sau.com.au/forums/topic/369487-m35-stagea-advice/
Share on other sites
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Daleo
Daleo

In other news; No other car ever built in the history of motoring has ever had any kind of reliability issue. So probably just go & buy one of those. Maybe a Jeep; they seem quite good.

Sunkist
Sunkist

come at me bro.. no seriously come to melb again and we'll have a stagea dyno comp lol

joshm35
joshm35

Why not go the whole hog like i did and do it properly

Posted Images

bigkevracer Grand Master

bigkevracer

Posted
Posted

1. differences between RS/RX/ARX/AXIS? They all have the same VQ25DET (in series 1), but Iain is a nerd and can answer the rest of them. Some have HICAS and LSDs, AR-X has more boost and plastic overfenders.

2. The front bar you're talking about is the Aero kit, which was a factory option on RS and RX. I don't think the wing was a factory option, and you'd have to chase it down through Yahoo Auctions Japan.

3. Turbo, but Aaron and Scotty have found if you bore out the banjo bolt on the turbo oil feed from 1mm to 3mm they don't expire.

4. Depending on what car you go for, HICAS might not even be an option. My RS doesn't have HICAS.

5. Yes it is, in Adelaide you need to talk to Brad (ducati02 on here).

6. Series 1 is VQ25DET, Series 2 is VQ35DE. Series 2 also has tweaked bumpers and a tweaked (and probably slightly nicer) interior.

I see you're in Adelaide, you're welcome to check out my RS. I love it, greatest car I've owned, and has the Aero option you're after.

Otherwise come out to the next cruise and have a look. There are a few different ones, I know we're expecting a couple of RSs, an AXIS and maybe an RX, but I'm not sure if there are any AR-Xs in Adelaide.

Daleo Grand Master

Daleo

Posted
Posted (edited)

Hi Everyone,

Been ages since I've posted on SAU - sold my last Stagea years ago and have been living overseas since.

So we're returning back to Australia in a fortnight and I'm looking into car options. The M35 is looking like a solid choice, but I was just wondering if someone could find the time to answer a few questions...

1. Is there a good guide somewhere that describes the differences between all of the different models?

Start here; http://www.skylinesa...85569-m35-info/

2. Is the body styling specific to the model or were they factory options? I want the front bar with the two lower lamps in each side of the "mouth", and also the small rear wing. (As per this car > http://www.stancewor...read.php?t=9060)

Aero Selection Kit. Not hard to find a car with it fitted; worth the extra to buy one, gets expensive to do it down the track (as I have found).

3. What common problems do they have?

Turbo failure is the most common one; but this appears to have been traced (by Scotty & Aaron) to blocked oil supply Banjo bolt. It has a 1mm hole to reduce oil supply to the BB core and can block easily if the car hasn't been serviced regularly. Budget for a rebuilt turbo if possible, mine has done 40,00km without issue; others have failed much sooner. Searching will unearth several things, but others may care to elaborate.

4. I don't think I want HICAS, but I could be wrong. Just seems like something else to go wrong. Should I reconsider?

It's not a big deal, if you avoid HICAS you will not get a factory LSD; the two are fitted together.

5. I read somewhere that it is possible to convert the SatNav/etc system to English in these. Is there a thread about this somewhere?

Yes, it can be done; where are you located?

6. Any differences between the years that I should look out for? I'm only interested in the VQ25DET (not even sure if the VQ35DE is eligible for import anyway)..

Not really; you will find differing trim depending on what model you buy; cloth versus leather/power seats. PM/PNM's have a slightly more modern dash; looks quite slick, and the front end is different; again more modern, a tasteful evolution.

Any other advice? Pretty stoked that I looked into the M35's again, they are a great looking package for the money.

Have a fish around in the forum; there's heaps of info (and a bit of off topic nonsense) and loads of help to be had. I'm sure others will elaborate further, but it's all here if you have a poke around.

Cheers fellas!

Answers in red. Good luck!

Cheers, Dale.

*Edit* Nice one Ryan!pinch.gif

Edited by Daleo
Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

You should tag along with one of us on the next Stagea cruise. Get to meet a lots of great people and see all the different models. Its only 3 weeks away. Hope to see you there. :action-smiley-069:

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

i sold my series 2 c34 stagea 2years ago now, no big loss, the thing was a rust bucked with a screwd transmission.

since then i cant make up my mind one what car i want... i keep coming back to stagea's, would much rather a m35 over a c34 now, just from the fear of rust and meh, owned one before.

been looking at a heap of m35's man, they keep getting better!! saving starts now, i may be coming back to the forums shortly with alot more questions :D

Sunkist Grand Master

Sunkist

Posted
Posted

i sold my series 2 c34 stagea 2years ago now, no big loss, the thing was a rust bucked with a screwd transmission.

since then i cant make up my mind one what car i want... i keep coming back to stagea's, would much rather a m35 over a c34 now, just from the fear of rust and meh, owned one before.

been looking at a heap of m35's man, they keep getting better!! saving starts now, i may be coming back to the forums shortly with alot more questions :D

especially when its not hard to push them above 300kw :ph34r:

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

Bailed on the R34?

Go with a good M35.

m35 look more classy aswell as really tough!!

dont know if i'll go down the JDM track with it though...

especially when its not hard to push them above 300kw :ph34r:

and still keep fuel economy down :P

SMOKEYV35 Mentor

SMOKEYV35

Posted
Posted

there is a white Autech Axis for sale in the classifieds section. i would trade mine for that straight erp.....it's a lovely looking piece of gear, and fully loaded for 18k. can't go wrong.

prices on 35's have taken a big hit since i was looking 6 months ago. where as they used to be in the 20's, now they are regularly in the mid teens. if i was buying now i'd go straight for a 35 purely for the newer car factor and the extra creature comforts. if you like working on your cars, adding off the shelf parts, and tinkering around a bit though, C34 is where you need to be..... much more user friendly and wallet friendly.

Jetwreck Grand Master

Jetwreck

Posted
Posted (edited)

Fuel consumption is better with the 300awkws than the standard tune......if you get right up it though it tends to drink very well though!....as it should.

300awkws Aaron!.... You????....I'll smash that the next time I'm on the dyno! :P

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • robbo_rb180
      Neil's R33 Gts-t Build

      By robbo_rb180 · Posted

      AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • Duncan
      R32 GTR EV? The leaf of the Godzilla's!

      By Duncan · Posted

      I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...