Jump to content
SAU Community

Recommended Posts

1. ARX rims are 18 x 7.5 JJ, +40 offset.

2. I don't have any recommendations for tyres yet but the tyre placard says 225/55 R18 97H, although my ARX has 235/50 R18 101V (these came with it when I bought it). Having said this, when I upgrade my wheels I'll be looking at a larger rolling diameter to hopefully correct the speedo and maybe even improve the fuel economy.

3. In the "M35 - Light Changes" thread M35 - Light Changes recently Duncan (Dunc) posted a photo of the indicator bulb. Basically it is a larger version of the parker (T10). I think they are known as T20 and it should be 21 watts as specified in the handbook. I'm fairly certain the rear bulbs are the same as the front.

Cheers

  • Replies 193
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi chaps..

Question - Does anyone know if the VQ25DET turbo to dump gasket is the same as the RB26s? Will install a new system soon and need to know.

Cheers all..

Generally the stock one will go the distance. It is good quality and still using the stock one after turbo change 4.5 years of driving.

Generally the stock one will go the distance. It is good quality and still using the stock one after turbo change 4.5 years of driving.

+1. I think mine looked perfect when it came out but put it back with a smear or hi temp silicon on both sides just to be sure.

High temp silicone will go hard and brittle on the turbo housing Leon, I only use it if the flange wont seal now.

As there is no real pressure after the turbo the gasket isnt critical, it should be fine even if its cracked. Our turbo outlet gasket is VQ specific and was only on the VQ25det's and VQ30det's, you will need to go through Nissan for that one.

The pre turbo gasket where it bolts to the manifold is a standard T3 gasket and should be replaced whenever the turbo is removed with a good multi layered stainless gasket. Pressures in the manifold can be quite high.

Part number for the turbo gasket is 14445-4P200 in case you need it. For reference it was only used on Stagea (VQ25det) and F50 Cima (VQ30det)

This may help.

http://justjap.com/store/product.php?productid=20105&cat=&page=1

High temp silicone will go hard and brittle on the turbo housing Leon, I only use it if the flange wont seal now.

I hope not! I'd be royally peed if I have to remove the dump again. But I had a look at the packet & it's temp rated for turbos.

In any case, it was only a smear, more to hold it in place than anything else. It all seems OK till now & been on for a while too - see what happens in the next few years.

i have a spare for each end, but im pretty sure you can buy new ones. if you get stuck let me know, id really rather sell both as a pair or with the spare rack i have

how much u sell the pair for?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A bit of data is always good, beats the Facebook experts with their opinions I have Bosch 1480cc injectors, often called 1650cc (only when run at 4bar). I run mine at 3bar base so I don't thrash the fuel system. Up top, making 437kW with boost dropping, injector duty is at 69% on E80 (might have had some residual 98RON in there)  
    • I have some downtime due to winter, and just wrapped up converting the car over to flex fuel. We don't get E85 at the pump over here in Canada, but I will be running Ignite E90 Race gas. I'll be mixing it with 99-100 RON pump gas and shoot for 50% ethanol content, up to possibly 85% content if there's any noticeable gains. Here's the question. Most I'll ever want to hit is ~600rwkW. I've currently running 1200cc injectors and want to keep them under 90% duty cycle. As per some online injector calculators, I should be good with 1200's well past 600rwkw on E85. As per other calculators, I'll need 1600-2000cc's. The variety is rather amusing.  With you Australians having E85 at the pump, what realistic duty cycles are you seeing in those kW ranges on E50 & E85 on your injectors? Thanks, 
    • No issues here with my PRP gears in an OEM pump housing. I did confirm all housing clearances were to spec prior though. Cheers. 
    • Thread is a bit old but figured id give my input anyway just incase. Have had lots of water problems in my R32 and was getting sick of wet tools in the boot and water filling up half my taillights. I ended up finding that whenever my car had been repainted they didn't reseal the taillights to the body of the car so water was just flowing straight into the boot, this is amplified by all the water around the bootlid being directed down to the taillights so would get pretty wet whenever I washed the car or it rained. You could probably use silicone to seal them to the body but I think from factory they use a roll of automotive grade butyl rubber. Hopefully this helps you if that ends up being how the water is getting in on your car!
    • Correct And whatever you do, don't use an oil pump gear, especially the one that starts with the same letter as Santa and the last letter ends with the same first letter as Lagoon. Get a proper oil pump, like a Nitto, Tomei, etc. and make sure you invest in a big fk off sump. Won't go into too much detail, but I am sure it caused my previous built motor to go bang.
×
×
  • Create New...