Jump to content
SAU Community

Toshi Will Coming Back To Qld In 30 Th November (This Month)For Real Time Tune On Road R33 From $550


Recommended Posts

Someone interested in tuning in QLD NOVEMBER this month.

I tuned Mr David Stankowski drift car in gold cost last trip and he got second place after my tune! PRO TOUR 2011-----Round 4----QLD RACEWAY----Sun july 31

http://www.nissansilvia.com/forums/i...entry6346004

Also another R33 GTST made 215kw from std turbo at Brisbane customers car.

I will come back QLD NOVEMBER (this month).

If someone interesting please send e-mail , PM, SMS or call me.

Ph 0410490049

e-mail [email protected].

How to tune on road

I will fit wideband air fuel ratio meter(same dyno machine O2 sensor), and lap top computer, Gizzmo KMon Knock Monitor & Analysisor,before we leave.

While the customer is driving,I will sit in the passenger with my laptop.

Start with 2nd gear, winding up from 2000rpm-5000rpm to check car condition and datalog.

I will make fuel and timing map then 2nd gear again to check air fuel ratio and engine knock.

After making rough map on 2nd gear, we will go to freeway .With 3rd/4th gear, we will be running on freeway from 2000rpm-3000rpm to check engine response and engine knock.

Then next 3000rpm-4000rpm ,this will be repeated in increments of 1000rpm.If we find flat spot , slow response , laggy,engine knock etc I will fix and tune on freeway.

After that is done, we will go to small mountain then check response and power feel.

Take around 4-6hours.

If customer would like to check power and power curve etc we will go to nearest dyno shop.If necessary I will adjust fuel and timing map ondyno. We will return via route with small mountains to further check response and power feel.(this is road and dyno tune)

Tuning Price

R33 ecu tuning on road tune $550 exchange ecu include ecu modification and chip (std turbo , std injector,std AFM)

R32 ecu tuning on road tune $500 (std turbo , std injector,std AFM)

R33 Bigger turbo , Z32 AFM $650

R32 Bigger turbo ,Z32 AFM,injector $600

This price include modified ecu and chip.

You do not need extra money.

tune from $450 labor for nistune and power fc.

This thread tune for Z32 on road tune.

I remapped ecu planetrobbis car in QLD (This is not NISTUNE)

http://www.aus300zx.....ighlight=toshi

I tuned NISTUNE sbes NA car in VIC.

http://www.aus300zx.....ighlight=toshi

This is my thread on skylines Australia.

I tuned over 150 RB engine cars.

http://www.skylinesa...page__hl__toshi

Ph 0410490049

e-mail [email protected]

I will visit Brisbane 21st Thursday July.

21st & 22nd is booked out.

Anyone interested in tuning on 23rd (Saturday) 24th (Sunday)?

R33 ecu tuning on road from $550(std turbo , std injector,std AFM)

Please call 0410490049

e-mail [email protected]

Hey Toshi, any chance you will be coming to SA in the next 6-12months and do aftermarket tuning???

How much for a series 2 manual stagea(same ecu as r34), hypergear atr43 SS-1 turbo, deatschwerks 440cc injectors, z32 afm and walbro gss-341.

How much for a series 2 manual stagea(same ecu as r34), hypergear atr43 SS-1 turbo, deatschwerks 440cc injectors, z32 afm and walbro gss-341.

Nistune board $850 road tune

Daughter board $670 road tune

Both same performance.

  • 3 weeks later...

Im coming to gold cost now and someone canceled tomorrow tune 25th July.

If someone interesting tune tomorrow 25th July please call me tonight.

Ph 0410490049

I made 215kw from std turbo (this is power map so not good fuel consumption) at Brisbane customers car.

Damn i always miss good stuff!!!!!

Toshi will you be coming back to QLD?

Cheers

Im coming to gold cost now and someone canceled tomorrow tune 25th July.

If someone interesting tune tomorrow 25th July please call me tonight.

Ph 0410490049

I made 215kw from std turbo (this is power map so not good fuel consumption) at Brisbane customers car.

  • 4 weeks later...

I did real time ecu tune (R33 ecu ) Mr David Stankowski drift car in gold cost at 23 July 2011 and he got second place after my tune! PRO TOUR 2011-----Round 4----QLD RACEWAY----Sun july 31

His cars engine is RB25DET std turbo,std AFM,std injector, and my remapped R33 ecu.

http://www.nissansilvia.com/forums/index.php?showtopic=480831&st=0&p=6346004&hl=David%20Stankowski%20&fromsearch=1entry6346004

I will come to QLD again.

Anyone interested in tuning in QLD?

  • 1 month later...

I send PM.

i could be interested in next few weeks wen get car back will be looking at nistune and tune for mods are s2 RB25, 3 inch zorst, greddy copy plenum,

FMIC, HKS top feed fuel rail GTR injectors 444cc, 044 with surge tank, std turbo.

price would be muchly appreciated thanks mate

Oi is that you Richard ^^^^

It's Bejay I'f ur wondering lol

Toshi I would be interested in a tune also r32 rb20det

33 turbo

Splitfires

Walbro pump

Full 3"

Blits cooler kit

How much for the nistune board and tune

And do u want my ecu as an exchange correct?

Oi is that you Richard ^^^^

It's Bejay I'f ur wondering lol

Toshi I would be interested in a tune also r32 rb20det

33 turbo

Splitfires

Yer bro it's me :) oi if we can get 1 more pretty sure he will defs come do them 3 ppl I think we need and yer what's the go with the exchange cause pretty sure u can't use rb25 ecu's with 25's think I need a 20 or z32 ecu? Just wanna use a nistune till I get my bigger turbo setup then I'll just use the haltech

How much for the nistune board and tune

And do u want my ecu as an exchange correct?

i could be interested in next few weeks wen get car back will be looking at nistune and tune for mods are s2 RB25, 3 inch zorst, greddy copy plenum,

FMIC, HKS top feed fuel rail GTR injectors 444cc, 044 with surge tank, std turbo.

price would be muchly appreciated thanks mate

Hi

Price $550 road tune R33 ecu exchange.

If you want to also dyno tune $600 plus dyno fee (I think around $100)

Oi is that you Richard ^^^^

It's Bejay I'f ur wondering lol

Toshi I would be interested in a tune also r32 rb20det

33 turbo

Splitfires

Walbro pump

Full 3"

Blits cooler kit

How much for the nistune board and tune

And do u want my ecu as an exchange correct?

If you would like to cheaper price you do not need nistune board.

I will tune by emulator and nistune software.

Price $550 ecu exchange

Thank you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...