Jump to content
SAU Community

Recommended Posts

Dumbells = sort out strength bias

Barbell = bigger range of motion

There are advantages and disadvantages to both, however, if you're aiming to bias a particular muscle group with your flat press...a barbell is easier to maintain and monitor strict movement with.

Wide grip on bar = more delts

Close grip on bar = more triceps

Bar lower down the chest = more chest

Bar closer in line with shoulders = more delts

Flat bench will work all those groups regardless, so I wouldn't overthink it. If you want larger front delts, focus instead on incline and military press exercises - I'm front delt heavy because of these. I love the smell of front delts in the morning!

(they do look awesome after shoulder press, with that big vain popping out)

  • 2 weeks later...

So I've run myself into the ground big time over the past week due to a serious lack of sleep. As of Monday I'll be starting a very in-depth diary of my daily eating and sleeping habits, as well as hopefully starting a proper 8 week structured meal plan instead of winging it like I do far too often.

f**k my inconsistency, too lazy to change my bad habits lately

So I've run myself into the ground big time over the past week due to a serious lack of sleep. As of Monday I'll be starting a very in-depth diary of my daily eating and sleeping habits, as well as hopefully starting a proper 8 week structured meal plan instead of winging it like I do far too often.

f**k my inconsistency, too lazy to change my bad habits lately

Yeah i got into a habit of going to bed at about 3am recently because I'm on holidays from CIT. This caused me to get the flu, so I took a week off of training and started going to sleep at midnight, no later.

First day back was last night and I'm feeling great now :yes:

Changing up my routine from 2 day split to the below routine I simply nabbed off a sticky on bb.com. I've not only hit a plateau but I've actually gone backwards again with certain lifts (which I'm certainly not blaming entirely on not having changed routine for a very long time). Hoping to get some results from a different routine as well as enjoy it a bit more. Started this tonight, get the feeling I'll enjoy it. Won't be sticking to it strictly, but near enough.

Day 1

4x Squats: 5 reps

3x Ham Work: 8 reps

3x BB or DB Row: 8 reps

2x Bicep Curls: 10 reps

Day 2

4x Bench Press: 5 reps

3x Military Press: 8 reps

3x Tricep Isolation: 8 reps

2x Ab/Calf Work: 15 reps

Day 3

4x Deadlifts: 5 reps

3x Pullups: 8 reps

3x Leg Press: 8 reps

2x Biceps Curls: 10 reps

Day 4

4x DB or Incline Press: 5 reps

3x Chest Dips: 8 reps

3x Side Lateral Raise: 8 reps

2x Ab/Calf Work: 15 reps

Day 1: On

Day 2: On

Day 3: Off

Day 4: On

Day 5: Off

Day 6: On

Day 7: Off

  • 3 weeks later...

hahaha nah man Gosty has a bit much on me right now, and I'm currently having some lower spine/pelvic issues at the moment (upper back muscle imbalance --> too much pelvic tilt) so squats and deads are out for a couple of weeks :( funny how little things in the body can cause problems elsewhere due to other muscles picking up the slack.

Sucks to hear man. Where would I go to get someone to check if my spine and back muscles are all okay? I don't really have any problems at the moment but I did in the past with lower back pain and I wouldn't mind seeing if my orientation is good or not.

Sucks to hear man. Where would I go to get someone to check if my spine and back muscles are all okay? I don't really have any problems at the moment but I did in the past with lower back pain and I wouldn't mind seeing if my orientation is good or not.

Likely Osteopath. From what I gather, they're by definition all about the back/spine. That's where I've been going occasionally to suss out my lower back pains.

Or you can just see a chiropractor. My chiro sorted out my spine and hips a while back

We'll see. Ultimately I have very little confidence in any of these professions...and I'm extremely uninterested in hearing any advice that involves cessation of lifting weights - be it temporary or otherwise - which is what most of them end up going with (and ironically the opposite of what has done wonders for my upper-back cramping).

Anyway, since this is really supposed to be a 'progress' thread, figure I should put that in here haha...

More leg press (temporarily in place of squats):

120kg x 5

240kg x 12

320kg x 8

320kg x 8

340kg x 5 (10kg off PB, but definitely more ROM this time)

200kg x 20

Single-leg press. Reps for each leg individually.

120kg x 6

120kg x 5

Find a good massage therapist that has decent training and they can assess you just as well in terms of body position etc as a physio/osteo/chiro.

I would be going to see a good hands on type of physio/osteo if you're concerned about things though. They can do bone manips as well as soft tissue work whereas chiros will only do bone manips most of the time which is only addressing part of the issue.

Edited by Mitcho_7

Find a good massage therapist that has decent training and they can assess you just as well in terms of body position etc as a physio/osteo/chiro.

I would be going to see a good hands on type of physio/osteo if you're concerned about things though. They can do bone manips as well as soft tissue work whereas chiros will only do bone manips most of the time which is only addressing part of the issue.

I'm finding that stretching my glutes by laying on my back and pulling my knee to my chest while pulling my foot off to the side a bit is helping a lot with the pain.....f**k this is just confusing as all hell. Is it muscle? Is it bone? Is it disc? Is it even in my f**king back? hahaha

Got another Osteo appointment this arvo, will see how we go.

With manual therapy, it's hard to find someone good these days. So when you find someone good it's like gold!

I hate the lazy physios that just ultrasound and ice with like 10 minutes hands on, if that.

Hopefully you get your issue sorted out.

Leg press is worse for your back then if you were squatting... this is due to your lumbar spine rounding at the bottom of the lift... do some research you will find a few articles on the topic

professionals often tell you to stop lifting weights just to cover their own arse... I used to get some lower back back pain but ever since I started deadlifting heavier it has gone away completely... and my DL technique isn't the prettiest either

Try focusing on strengthening your glutes, stretching your psoas/quads and foam rolling... these are all things that have seemingly worked for me

professionals often tell you to stop lifting weights just to cover their own arse... I used to get some lower back back pain but ever since I started deadlifting heavier it has gone away completely... and my DL technique isn't the prettiest either

Couldn't agree with you more. I was told to look into yoga for my upper back cramping...so what did I do? Ramped up the deadlifts big time. Fixed that shit up like you wouldn't believe (or ironically, YOU would believe :P). Now that I haven't been deadlifting at all over last few weeks, upper back is cramping again :( problem is though, deadlifts are the main exercise to set off the pain I currently have. Stretching glutes/hamstrings/hip flexors etc makes it feel better though...

Got a f**king cold now though so skipping gym for rest of the week. Will just stretch as much as I can for the next few days.

  • 2 months later...

UPDAAAAAAAAAAAAAAAAATE!!!!

Well, just a pic really - since my lifts are fairly the same. Although I'm up to 90kg 3 reps barbell bench press, got 95kg 2 reps easy enough.

I've been cutting back relatively full on over the last month and a bit in preparation for an 11 night cruise I've got coming up next Tuesday, headed out to Vanuatu etc :D here's my wanky stance selfie. It was taken in the gym bathroom, so I suppose you could apply a similar handicap to Birds' tinted car window pics :P

ns4G7.jpg

I still look average as hell with a shirt on hahaha, but summer = shirt off as we all know :D

Bro, you're going to get laid on that trip lol.

At what weight did you start cutting and how much have you lost so far? You look between 8-10%bf in that pic, not sure if your pumped/flexing whatever though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...