Jump to content
SAU Community

Eoi: 18X10 +18 And 18X11 -1 Stitch Evolution Wheels

DanielH

By DanielH,
in Tasmania

 Share

Recommended Posts

DanielH Community Regular

DanielH

Posted
Posted

Just putting these out there to see what kind of interest i get as they are a bit too aggressive to fit my supra and i dont really want to modify the gaurds as much as i would need to.

I bought these wheels with my cefiro but won't be tracking the car on them as theyre a bit too rare/expensive to risk smashing them, plus the rears wont fit under the gaurds with slicks so i will just be running some Lenso D1Rs.

They are a 3 Piece rim and are multifit 4/5 (4x114.3 and 5x114.3).

What i would like to do is swap these for something slightly less aggressive in offset (similar width in +20ish offset would be nice), or i will sell these for the right cash offer.

The gold is a bit faded and is peeling in a few spots but there is minimal rash on them and no bends/dents.

Also note i never got the center caps with these wheels but they look better without them if you ask me whistling.gif

If anyone is keen or would like to make an offer contact me through here or SMS me on 0408 117 171.

Cheers,

Daniel

post-64152-0-31586100-1309668083_thumb.jpg

post-64152-0-18179100-1309668094_thumb.jpg

post-64152-0-09071900-1309668140_thumb.jpg

post-64152-0-80467600-1309668150_thumb.jpg

DanielH Community Regular

DanielH

Posted
  • Author
Posted

Also the front tires are almost new but unmatching 235s, and the rears are 245's with approx. 30% tread left, can come with matching brand new fronts and 60% rears of the same size if any interest is there.

DanielH Community Regular

DanielH

Posted
  • Author
Posted

What are you doing with the car? drift hack? , the wheels kinda make it :unsure: . you know , if you buy d1r's, our cars are gunna be pretty close to twins >_<

Yeah they do make it >_< And nah unlikely ill drift it - club days, hill climbs maybe, drags when i feel like it.

  • 3 months later...
DanielH Community Regular

DanielH

Posted
  • Author
Posted (edited)

Bump! still thinking of selling these, have since found out they are a 2 piece and not 3, and have begun stripping the paint off the centers as the gold is peeling, looking for around 1500 as-is or 1800 painted, or will swap for some decent wheels around the 18x10 +20 mark to suit a 32 GTR

Edited by DanielH
  • 2 weeks later...
DanielH Community Regular

DanielH

Posted
  • Author
Posted (edited)

Another bump! $1300 as they sit! 1 rim has been pulled apart and had the center dipped to see how easily the paint will come off, and the other 3 are exactly as pictured.

Edited by DanielH
  • 1 month later...
DanielH Community Regular

DanielH

Posted
  • Author
Posted

Bump! all 4 rims now together, one is painted in a darker gold as a test to see if i like it, they were on my car at the last drag meeting if anyone saw the blue 32 GTR there

  • 2 months later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Nismo coppermix twinplate clutch

      By joshuaho96 路 Posted

      From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 路 Posted

      HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • hfygrte52
      R33 GTR tail light

      By hfygrte52 路 Posted

      i need a complete tail light for my R33 GTR if you have please let me know.
    • hfygrte52
      Needs

      By hfygrte52 路 Posted

      I need a great maintenance workshop around Idaho, if you know one please let me know..
    • hfygrte52
      Need 1993 GTR

      By hfygrte52 路 Posted

      Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
脳
脳
  • Create New...