Z32 Afm In R34 Neo

[369]

i came across a wiring problem when i cut into my r34 afm wiring loom.

as you can see in the picture:

white with blue trace = ground

black with white trace = 12v+ power

orange with blue trace = ????????

the thick white wire has the ground and orange/blue wires AND it has loose wiring in it as well.

does anyone know what i do with the orange/ blue wire and the loose wiring in the white insulation?

i also attached a pic of the z32 plug wiring, help with this too, ie. what are the wires?

does anyone know how to remove the 3 bolts on the underside of the intake manifold? see picture

thanks

Edited July 3, 2011 by 369

[Kenna802]

Have a look in the z32 afm guide in general maint...also its no good to change AFM unless u can tell the computer that it different. And last its a mother to remove those but it can be done....slowly... from underneath with extension sockets ( great way to spend a fair few hours )

[369]

i did have a look at the guide but it did not say anything about the loose wires in the white insulation.

i'm getting a nistune as well.

btw, wat extension sockets do i use?