Jump to content
SAU Community

Recommended Posts

that's great Martin, thanks for posting

so once ecu is remapped area under curve is pretty much the same

the 2011 has a stronger top end, could that be due to the larger turbo intake piping?

Same conclusion here. Once properly tuned they are almost the same.

The two cars output is so close due to the fact that they have a mechanically identical engine package and turbochargers. The MY11 has fractionally larger inlet pipes which at this level of tune dont make a massive difference, but do account for some of the top end improvement

Wow, those results are so definitive. Very much the case of holding back something when first developed so you have something to market when the new model is released. We'll have to call it the new "Apple iGT-R" :nyaanyaa: Based on this and the availability of the Cobb TCM software one would think we can get old and new GTRs launcing relatively similarly and giving identical acceleration figures.

Martin

Thank you very much for the datayes.gif

Now I can stop thinking about wasting a pile of money on the new model.

My 2010 already has your full Ti Exhaust system and a bunch of other stuff.

Sounds to me like some of those 08, 09 & 10 GTR's that have popped up on the car sales website to upgrade, would be better off giving you a call and going to their local Willall/Cobb tuner and get updated mechanically for a truck load less $ than buying the new model.

Your detailed data makes me feel a whole lot better about my decision to keep my car and continue to upgrade it.

I also just ordered your splitter through Mercury and I think your turbo upgrade kit etc, is on the cards in the near future?

Kymbo

Thanks Kymbo :)

From our analysis the reason that the 2011 is quicker in magazine tests is not only its improved transmission software, but the ease with which you can put it into Launch Control mode. Many journos struggled getting their head around LC2 and simply bogged the car against the brake thinking it was in Launch mode...when in fact it wasnt. LC4 makes it easy for scribblers to actually get it right for once - hence the car road tests as a missile :)

so martin , according to the dyno there is about 10 ish kw difference . But carsales has this in their reviews -

"Despite a significant increase in output, now 390kW/612Nm against the predecessor's 357kW/588Nm, the GT-R is so tactile in delivering its mother-load that one would really need to be insensitive to such astounding figures to make a schemozzle of proceedings."

that's at 33kw difference , one car is either over stating or the other car is under stating.

so martin , according to the dyno there is about 10 ish kw difference . But carsales has this in their reviews -

"Despite a significant increase in output, now 390kW/612Nm against the predecessor's 357kW/588Nm, the GT-R is so tactile in delivering its mother-load that one would really need to be insensitive to such astounding figures to make a schemozzle of proceedings."

that's at 33kw difference , one car is either over stating or the other car is under stating.

they're quoting engine power. and again not sure if what they are quoting is 100% accurate.

thanks for sharing martin. 09s certainly are rich and the 11 is nearly a full point leaning right through the map. I guess the leaner tune, more midrange boost accounts for the power difference really. the 11 really has a nice hit of boost in the midrange which would certainly make it feel a hell of a lot faster too.

ultimate results are not surprising. they have the same hardware and once tuned the same 'software' so getting the same output is no surprise. again, thanks for posting.

Bit of a noob here and have a question regarding the launch control? Hope someone can set my mind at ease. Looking at getting a R35 but not sure on 09/10 vs MY11 - Was leaving toward the 11 due to the launch control being covered under warranty and not so hard on the transmission.

1) So is there a concern with transmission issues on a used 09/10 with launch control - does it void the warranty?

2) Can the software changes for launch control applied to MY11 be applied to MY09/10's

Thanks

LC was discussed at length a while back here

cliff notes;

- 09 ADM build has LC1, but need to turn VDC-OFF, hence no warranty

-10 ADM build has LC2, but can be used with VDC-R and few hundred rpm lower, hence warranty

- 11 ADM build has LC3, but can be used with VDC-R with similar rev limit to 09 ADM, hence warranty

of course that warranty is all dependant on you leaving the car 100% stock, or lucking it up with a mod friendly dealer when something goes boom

if you wish to improve LC even further, cobb have that covered

http://cobbtuning.co...oducts/?id=5676

- ENHANCED LAUNCH CONTROL:Updates TCM to Nissan LC2 launch control logic with two user selectable launch control modes! Level 1 sets launch control revs to 3,300rpm (300 more than stock LC2) with more aggressive clutch engagement and throttle curve. Level 2 raises launch control revs to 3,700 rpm with the same clutch and throttle characteristics as Level 1.

imo LC is fun the first couple of times as a novelty when you first get the car, but as you begin to modifty the car, i dont find myself using it anymore or necessary to go quick off the line - save your tranny/drivetrain the stress and reduce the need for any repair bills

Edited by domino_z

Correct - it was only the few 08JDM imports that came in that had the LC1.

All Oz delivered cars had at least LC2 that you could launch without the VDC being off. The only warranty concerns were if you switched the VDC off - but you could launch all you liked.

sorry Hazey i gotz those cliff notes wrong

either way, dont get too caught up in the warranty of using LC

if you have any shred of adrenaline or motoring enthusiasm in you, you wont keep this car stock with that pitiful electronic whine of an oem exhaust and limited by design 'apple iGTR'1 factory power output

1Fungoolie - pure geniusism

Its not "just" the power upgrade that I like about the 2011 model.

The interior is nicer, the suspension is smoother, the wheels look awesome,

and then there is the new colour.

Nothing wrong with the 09/10 models - never will be.

Just good to see the little tweaks have made it a better overall car than the previous one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The steering wheel on my 97 s3 gtr is a little bit worn out, so im on the hunt for something mint. I notice that this type of steering wheel is on several other nissan's of the era.  Does anyone know if their all identical, or are there slight differences? I feel like gtr tax applies to anyone selling one, but if it comes from any other car the price is much less, even though its the same design.  Chat gpt says the material for the gtr is slightly different and it says gtr on the wheel, but every pic ive seen it just says nissan. 
    • I might have to say it.
    • Ahh... it's an early RE5R01A box, that means the pinouts I gave are wrong (they were for the RE4R01A 4-speed box)... I'll have to dig around in my docs to see if I've got that schematic (they used the same gearbox plug, with the vacant pin wired to the direct drive clutch solenoid)...prolly hidden away in a supplement somewhere... ...there were 3 variants of the RE5R01A ~ this early schema was what we called the 'dumb' 5 speed ; it's what jatco called a 'medium duty' box, with torque holding up roughly ~200ft/lbs or so, which was good for NA from RB20/25DE and up to around VG30 output spec. With the RB25DET (and VG33/35 mills), the only options they had was the 4-speed 4AX00 box, which had been beefed up to handle the extra torque (primarily for the VG35, but it also suited the RB25DET mill and others)...and the RE4R03 box in large 4WDs a lot of the time... ...the next variant of 5-speed was redesigned, stronger, and 'smart'...first ones had external TCU with internal (on valvebody) Shift Control Unit, pressure switches, and 2 x TSS...and the last ones had internal TCU+SCU setup, with CANbus control etc etc. @DRoc81 On the RHS of the box towards the rear, there should be a stamped silver ID tag -- what's the model number? Oh...and with the early 5-speeds, the torque converter control solenoid assembly should be replaced as well (31940-60X00)...it's a bit Murphy's Law ....if one has failed, bet on the rest not being far behind ...
    • I remembered wrong, but was close though 1Kz setting because those Jaycar SSRs don't go any faster, 1x pump per SSR with flyback diodes & heatsinks. In saying that, the heatsinks are overkill. Just on an alloy plate is more than sufficient. You'll find without a flyback diode, your SSRs will heat up big time and also die prematurely.  I've been running the two same SSRs since the last motor, no issues, car does 2 hour straight drives in summer once in a while and gets punished on the track. Nothing melts, no hot messes, etc.    
    • Hmm. You're probably best off working out what the lobe centreline or even the LSA is for the stock cams, with VCT OFF. That's bound to be out there somewhere. Then, work on the assumption that the Kelford centreline is probably the same, and wouldn't be more than a couple of degrees away, if it is different at all. I'm very surprised that you needed to adjust the exhaust cam by 5° to get it on spec. That screams there's another problem somewhere. Anything from the belt being 1 tooth off (how many degrees is one tooth worth?) to simple user/measurement error on the degree wheel. I say this because Kelford, like most quality cam manufacturers these days, does a pretty good job of actually making the cams to spec, not relying on patching it up afterwards like we had to do back in the 80s.
×
×
  • Create New...