Jump to content
SAU Community

Recommended Posts

before pulling the starter motor out:

Check your battery voltage, both just sitting with everything off (Should be about 12.6V or so) and then during cranking (shouldnt drop below 9v from memory, even 9v I think is getting to low)

if this checks out, put the car in gear and roll it back or forward a bit (the gear for the starter might be jammed against the ring gear.

But if this fails then I'd say it would be the starter motor as suggested

  On 09/07/2011 at 3:22 AM, Munkyb0y said:

dead battery

RAA gave me a jump and all good. Battery is a RAA one, just over a year old. Bit surprised.

The dude didn't reconmend buying a new one, might have to look into a jumper pack in the near future.

sounds like mine when my battery dead, the battery got not enough power to start the car. If jump is working then your car can still use the battery for a few days/weeks?

Jump means you taking other's car battery power to start your car and then you still use your underpower battery, the car do charge the battery but it won't last long anymore. It will die soon so replace the battery asap.

  On 10/07/2011 at 6:44 AM, MrKenny said:

sounds like mine when my battery dead, the battery got not enough power to start the car. If jump is working then your car can still use the battery for a few days/weeks?

Jump means you taking other's car battery power to start your car and then you still use your underpower battery, the car do charge the battery but it won't last long anymore. It will die soon so replace the battery asap.

Not true, my battery has gone flat about 3 times in the last year and is still fine.

Only a cheap compliance battery as well....

  On 10/07/2011 at 8:21 AM, 89CAL said:

Not true, my battery has gone flat about 3 times in the last year and is still fine.

Only a cheap compliance battery as well....

yeah same..get a proper (plug in the wall) battery charger, bunnings has them cheaper than auto stores, I got a fairly decent one with an engine start option on it as well for about 60-80$..

my battery has gone flat numerous times..but after a good overnight charge its good as new..

If battery keeps dying, won't it be an alternator problem?..

Or is it because of the cold weather? I know that short drives + loud music w/ sub can drain the battery before the alternator can charge it

  On 10/07/2011 at 1:17 PM, Charles89 said:

If battery keeps dying, won't it be an alternator problem?..

Or is it because of the cold weather? I know that short drives + loud music w/ sub can drain the battery before the alternator can charge it

Ohhhhhhhhhhhhhh, maybe that's what happened to me!!! i had pretty good sound system and maybe the battery went flat before the alternator charge it!! That is why the battery keep going flat and die. And short drive yes :(

  On 10/07/2011 at 1:17 PM, Charles89 said:

Or is it because of the cold weather? I know that short drives + loud music w/ sub can drain the battery before the alternator can charge it

That makes perfect sense, I recently moved within 15mins of my work and only drive the car there & back at night.. with the sub going nuts lol..

  On 11/07/2011 at 2:21 AM, 89CAL said:

It's a sign that youre either overworking your charging system or have an alternator on the way out

Neither are a good thing

Hrmn possibly.. now even with extended driving Im not holding charge after it sits for a night.

You need to check that you don't have a drain somewhere in my car. My old car had a dodgy earth and the glovebox light was shorting to ground (not through the switch) and staying on

This over night was draining the battery

Simple check I guess you could do to eliminate a failing battery is unplug it (negative first) and leave the car sit over night and plug the battery back in. If all is well then it's a problem with the wiring. If not it could be your alternator or your battery

  On 11/07/2011 at 9:31 PM, 89CAL said:

You need to check that you don't have a drain somewhere in my car. My old car had a dodgy earth and the glovebox light was shorting to ground (not through the switch) and staying on

This over night was draining the battery

Simple check I guess you could do to eliminate a failing battery is unplug it (negative first) and leave the car sit over night and plug the battery back in. If all is well then it's a problem with the wiring. If not it could be your alternator or your battery

RAA guy who came out to jump my car last night noticed my boot light wasn't turning off when closing the boot. We couldnt find the switch so thought it must have been in the lock.

Anyway, pulled the globe out yesterday and guess what? Car started first go tonight ^_^

Edited by awsam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...