Jump to content
SAU Community

Recommended Posts

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm

This is pretty much same specs as the Mines titanium down pipe and will fit GT-R 32, 33 & 34

Brand new item which I bought earlier this year but have since had a custom pipe made to suit my exhaust.

Therefore I dont have a need for this and would like to send it to a good home.

These are a piece of art and weigh in at 1.9kg's

Price is $1350 FIRM delivered .

ENDLESS CC-RG BRAKE PAD SET (Front & Rear)

This is brand new set of front and rear pads unused for GT-R33 & 34 and GT-R32 V-spec

I bought 2 sets of these in Japan last year.

One set are on my car and definitely dont need another set so these are sitting around gathering dust.

These are awesome pads for street and track.

Price is $520 for the Front & Rear set package delivered.

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

Bought these on the possibility that I was going to have run Power FC on my car

Have sorted out tuning for my F-con for the time being so not needed anymore.

These have been checked by mechanic at HKS and all in workng order.

Used but in good condition.

$1050 Delivered

APEXI POWER INTAKE KIT FOR GT-R 33 & 34

These are brand new unused and in original box.

Bought these same reason as above and would need Power FC and air filters.

$310 Delivered

Pics...

MIDORI FRONT PIPE

JF0S7259.jpg

JF0S7260.jpg

JF0S7261.jpg

JF0S7262.jpg

JF0S7263.jpg

ENDLESS CC_RG'S

JF0S8029.jpg

JF0S8035.jpg

APEXI POWER FC , COMMANDER & BOOST CONTROLLER

JF0S8013.jpg

JF0S8014.jpg

JF0S8016.jpg

JF0S8018.jpg

JF0S8028.jpg

mamma31-img600x337-1303952793iby8nf53708.jpg

I'll get some pics of the Apexi Power Intake Kit soon but they look like this

apexipodgtr2.jpg

Yeah Deano they are awseome pipes and ridiculously light.

Photo's do not do the justice.

Sad to see em go but have custom titanium pipe going on..

:ph34r:

would these be noticeably louder than stainless? different note?

I've heard them on cars at Midori and bloody awesome.. very similar to the Mines front pipe.

soooo.. that would be a yes for louder or just diff note? :D i have the Midori stainless front pipes, and Midori titanium catback but i'm wondering if it will just put it into silly noise territory if full Titan.... hmmm...

Will sound porn ...

I'll be seeing them in a couple of weeks so will try record one of their cars but most of em have full system

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

$1000 Delivered anywhere in Oz.

All pm's answered

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (On HOLD)

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (SOLD)

  • 2 weeks later...

ENDLESS CC-RG BRAKE PAD SET (Front & Rear) now $500 delivered anywhere in Oz

Absolutely awesome pad !!

Good price especially with current value of yen to the Aussie dollar.

Will cost you a good $60-$70 more now to buy off nengun etc.

These are in my opinion without doubt best Street/Track pad around.

Full set of front and rear pads !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Only needed to pull out the seats, center console and gear shifter surround, took a weekend and a fair few beers. You get to look forward to finding all sorts of weird shit under the seats and carpet, I pulled out a Chinese dudes passport from 2003, 220 yen and a condom wrapper 😆
    • Well, turns out not a lot happened from back then to now, between life again, and working on 3 separate other cars (only one of which was mine, and will now be departing the household soon).   So I decided with the whole "don't go outside, it's a cyclone!" Turning in to being not a whole lot, I ventured down to the garage, found a couple of water leaks in the shed (the main one I've already fixed), and then ended up "stuck" as it started pouring rain, and I didn't want to walk back inside in the pouring rain. This meant I ended up taking a look at the Skyline, and trying to work out what past Matt had been upto. I retraced a few things out from scratch, added the rest of the power feeds in that I needed for the indicators, and headlights. Double checked I'd wired a few things up correctly (and worked out how I wired a few things to begin with), updated my sparse notes. Added one of the ground points. Oh, and got really really dusty, as the car is quite dirty. Wrote up quickly what should be left for me to do with the wiring too. Adding the below photos more for my records than anything else. I need to make myself a proper book for the car that details everything, and how I've done it, but for now, this is my records... The third image is my most important one for me, and I need to draw it out into a proper schematic eventually. The last photo is my re-written list, I'd have put it on the white board, except I had to take the white board down to fix one of the water leaks.
    • Can try Maxima. Or random Infiniti models from the same era. Good luck with your hunt, let us know what you find!
    • Shall we... wake you up when September ends?  
    • I got the Repco video recommended on YouTube.  
×
×
  • Create New...