Jump to content
SAU Community

Recommended Posts

Hey

I finally seen my NM35 today at my mates compliance shop. Very happy with it. Im going to start servicing it tomorrow and Im trying to sort out what oils it needs.

Ive been searching through all the threads on here to check what weight oils I need but its very unclear and messy in the threads. I think the list below is correct, can someone let me know what weights are? Dont need brands, thanks.

Engine: 5w-40

Oil filter: NIssan

Front diff: 75w-90 GL4?

Rear diff: 80w-90 GL5? for LSD. Also not sure if it has LSD or not, I assume the weight will differ between the two? If so what are the correct weights for either LSD or NON LSD?

Transfer case: Matic J

Trans: Matic J

Attesa: ?

Brakes: DOT 4

Coolant: Nissan

Also I rang Nissan today for a price on the passenger cam cover seal, its ~$30 and 3 weeks from Japan. Anyone know who might have them in stock now?

Thought I would just do the gasket at the same time as the spark plugs to save doing it later down the track if needed.

If there is anything else I have missed please let me know.

Cheers guys

Edited by slippylotion

If it has an LSD it needs an LSD additive in the diff oil. I'm pretty sure if it has HICAS it has an LSD.

I used the same weight in the front and rear diffs, think it was 75w90, and the same oil in the transfer case and trans. I believe you can use the same in the ATTESSA and power steering too (I never changed it).

I went 10w40 for the engine, but close enough. It's all close to personal preference.

Filter is the same as a 350Z... that's been covered many, many times.

Funnily enough, I called Valvoline's info line, and they had NM35 Stageas on file, knew all about them, and knew all about the different oils and fluids.

There is a thread which makes this clear, it's just the brand that varies. Valvoline and I think Nulon make a Matic J equivalent if you can't get the Nissan stuff. I paid about $120ish for a 20L drum.

If it has an LSD it needs an LSD additive in the diff oil. I'm pretty sure if it has HICAS it has an LSD.

I used the same weight in the front and rear diffs, think it was 75w90, and the same oil in the transfer case and trans. I believe you can use the same in the ATTESSA and power steering too (I never changed it).

I went 10w40 for the engine, but close enough. It's all close to personal preference.

Filter is the same as a 350Z... that's been covered many, many times.

Funnily enough, I called Valvoline's info line, and they had NM35 Stageas on file, knew all about them, and knew all about the different oils and fluids.

There is a thread which makes this clear, it's just the brand that varies. Valvoline and I think Nulon make a Matic J equivalent if you can't get the Nissan stuff. I paid about $120ish for a 20L drum.

Thanks Ryan. Does your car have an LSD and HICAS?

So if its a 250t rs four it definitely wont have an LSD?

Cheers

Mine has neither LSD nor HICAS.

I believe an LSD was an option on the RS, mine just doesn't have it.

Haven't bothered to research them yet to work out if I can get one to fit, not high enough up the priority list.

Also found the rear diff on mine had a magnetic sump plug. Think the front did too, but not the actual engine.

As others have said; if you have HICAS, you have LSD. The HICAS rack is very obvious when you stick your head under the back end.

I have a 250t RS Four and it has HICAS & LSD; is good :ph34r:. A quick look should answer your question. If you want to cover your arse; it won't do any harm to use an LSD oil in a normal diff, the LSD oils just don't have friction modifiers in them.

Also regarding the Rocker Cover Gasket; I got one last week and it had to be ordered in; only took a week. Depends when in the cycle you make the order; it could be the day before they ship their 2 weekly lot; could be the day after. I've never waited longer than 2 weeks so far.

Ok. It doesnt have HICAS so Ill asume its not LSD.

So are the oil weights listed above correct?

Seeing as the rear diff is not LSD I will use the same 75w-90 oil weight as the front diff.

Ill also use matic d for the power steering and ATESSA.

Thanks

Edited by slippylotion

When I did my research I found that power steering and ATTESSA weren't that fussy. You could use the same fluid as you did in the trans.

Yep :thumbsup: they're just hydraulic pump circuits; any hydraulic fluid would do (any ATF type) there's only pump vanes & seals.

It's only when you introduce friction materials (clutch plates, bands); the type of fluid must match the friction material.

Does the m35 have only proper mechanical LSDs? Some C34s have a viscous lsd which is a sealed unit so that ordinary diff oil can be used in the diff. On the other hand I have an R33 GTR mechanical diff in mine (as does the 260RS and maybe some other) and I use Motul Gear Competition 75W-140 (for lsd) in that.

i would imagine its viscous. a mechanical diff in a family wagon? yeah not a good idea lol

I'm not sure; mine's pretty notchy under power, feels nothing like my old cone LSD that was preloaded to the shithouse; much tighter...

Might just be that they don't cop such a hard time at stock power output; so they're nice & fresh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I can do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
    • I say it often, none of this stuff is really Skyline-specific per se. But in general there's not a lot of people who actually know what they're doing. A lot of people charging like they do. Agile software development probably isn't the greatest idea for an engine controller.
    • Incidentally, I also put v3 of the tune on the car and did an oil change from 5w20 to 5w40 to see how it affected oil pressure in the mid to high end. I'm still happier with the thicker oil and will stick with it, but clearly the system is happy with 55psi even if I'm not! It's well within the service manual specs...but they are very open
×
×
  • Create New...