Jump to content
SAU Community

Recommended Posts

Hey guys,

Just been reading up through the epa guide lines and it states that no modified or aftermarket plenums are permited... So this means anyone with the greddy style plenum will have issues?

Just wanted to confirm with everyone. Anyone been done for it?

Cheers in advance guys. :-)

Link to comment
https://www.sau.com.au/forums/topic/370950-aftermarket-plenum-not-epa-friendly/
Share on other sites

i think the answer to your question is yes and yes.

although i thought it came under the 1 intake modification rule, but based on what your saying thats not the case. if it says illegal then its illegal.

If that's what is in the guidelines, then you've answered your own question.

As to whether anyone has been picked up, that simply comes down to luck.

Some people probably have, some probably haven't... That's not to say it wont happen tomorrow.

and it would depend how it looks too

if its all grey dark and oem looking and looks standard you might be ok

if its got HKS and greddy plastered all over it with shiny parts and nice blue coloured joiners etc

then its likely to get more noticed

Get it engineered then its all legal. For the intake plenum you'd just have to make sure the tune is correct, as GTRR34 says because the AF is different.

Do all your intake mods at once before doing the engineers though, as it will be expensive.

not to mention that with all aftermarket ecu's being illegal, you therefore can't "make sure the tune is correct"

(even if the tune is better for the environment than stock) go nanny state!

not to mention that with all aftermarket ecu's being illegal, you therefore can't "make sure the tune is correct"

(even if the tune is better for the environment than stock) go nanny state!

my case.

f**kn stupid i reckon.

but im told that a stand alone ECU which is locked after a tune can be engineered.

its only PBacks that cant be eng'd.

or was I being trolled

I had a Greddy copy on my 180, the boys at EPA still passed the car, guess they like me

Aftermarket ECU's can be legal providing they pass a special emissions test (which i was told by Lou at EPA is about 3g and if you fail there goes your 3g) and it must be locked.

Well technically you can pass with remap since you cannot tell from visually checking but the problem is passing the a/f tesf they do, so even if you did get an ecu engineereed but it failed the emissions test it still doesn' t help.

I had a Greddy copy on my 180, the boys at EPA still passed the car, guess they like me

Aftermarket ECU's can be legal providing they pass a special emissions test (which i was told by Lou at EPA is about 3g and if you fail there goes your 3g) and it must be locked.

And how do you lock it? a factory ecu is considered locked but is it really locked?

Well technically you can pass with remap since you cannot tell from visually checking but the problem is passing the a/f tesf they do, so even if you did get an ecu engineereed but it failed the emissions test it still doesn' t help.

Unless im mistaken you first need to pass the emissions test before you can get it engineered.........

my case.

f**kn stupid i reckon.

but im told that a stand alone ECU which is locked after a tune can be engineered.

its only PBacks that cant be eng'd.

or was I being trolled

Once you pass the ADR emissions testing aka: "3k if you fail, tough. You have to pay it again".

Victoria, fail state.

you know what is really stupid..

Adding an aftermarket plenum and nothing else would have zero affect on emmissions and would actually make the car slower yet some how its deemed bad enough to consider it defectable..

f**kin victoria

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...