Jump to content
SAU Community

Recommended Posts

Hey ya'll, put this thread in the forced induction section on a previous post but no ones replying

Just had a Garrett Gt 30 turbo, 650cc injectors, Z32 airflow meter put in my R34 GTT RB25DET with other mods put in before

Greddy FMIC

Xforce exhaust system

Walbro fuel pump

Turbosmart boost controller

Nistune

Podfilter

Currently running 214rwkw or 287hp. My tuner and mechanic is Andy at Hyperdrive in Malaga W.A.

Now he came across a small issue, that prevented the engine not reaching its potential, as closely as i recall he said that while he was tuning it he had set the boost to 13 but then it would go back down to 9 then work its way back to 13. The power from the turbo doesn't kick in until bout 3000-3500rpm, and he wants it to come on in that mid range of 2000-25000rpm, so that the engine can get what he estimated which was about 310-320hp. Andys told me hes calling up the turbo and boost controller peeps to see what they say, but anyone who has dealt with Andy knows he doesn't mess around with ya car.

Also has a idle issue sounds like the engine wants to stall.

If anyone who knows what the issue is, or what it could possibly be let me or Andy know. Cheers

Link to comment
https://www.sau.com.au/forums/topic/371157-engine-issues-for-r34/
Share on other sites

which boost controller is it, i know it says turbosmart but which one, what is the spring pressure of the waste gate, i'm going to guess 8-9psi and if so then get rid of that boost controller and get a good jap one.

i've had both and i don't care what anyone says the turbosmart e-boosts in my opinion are rubbish, i had one do a similar thing to me in the R32 after it was set up by CRD (so set properly), it came out the next day and a HKS EVC5 went in and no more problems

internal or external gate?

few simple tests to be done first. exactly what does it do with no boost controller (just running off gate/actuator pressure)?

next try a run with the signal line pulled off the gate and see what it does, stop if it goes above ~15psi

this will tell you if its your boost controller or the gate

I don't know mate I'm a chef not a mechanic, i can cook a mad feed, but wouldn't trust myself to touch the engine, not my area of expertize, but all these things i will jot down and tell Andy maybe he might know, but seriously keep the info comin fellas i need the help to fix this problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...