Jump to content
SAU Community

Gt3794R

Bm3025t

By Bm3025t,
in Engines & Forced Induction

 Share

Recommended Posts

Lithium Grand Master

Lithium

Posted
Posted

Never heard of out, Forced performance do their own hta turbo with a similar name though which I don't know of anyone using on an rb but I recon it would be a good high power combo. I know someone with a 3586hta on an rb30 and it makes over 500kw on e30 with awesome delivery.

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-5917341
Share on other sites
GTScotT Grand Master

GTScotT

Posted
Posted

http://www.skylinesaustralia.com/forums/topic/251820-got-over-400kw-atw/page__hl__over+400kw__st__900

In this thread you will find results from 3788's, try to remember they are bolted onto big budget RB30DET's and not your average forged motor.

Considering there are 4088s and 4094s I have no doubt that garrett has simply mixed and matched some existing parts. IMHO I would expect the 3794 to be a little better under the pedal and make roughly the same power as the 4088. With the 3788 still being the pick of the bunch.

In the GTX thread I already told you to search and that if someone had one it would already be posted. Moving on..

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-5917415
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

They actually seem to push more than 4088rs in the cases I have seen, interestingly enough.

Yeah, power capability of approx the 4294 but the response of something like a T04Z

Only a turbo you would select for making easy 600hp at the wheels or pushed hard to 800hp at the wheels with the right fuel.

We use the 3788 as it's better suited to what we do/need

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-5917518
Share on other sites
  • 9 months later...
Lithium Grand Master

Lithium

Posted
Posted

For anyone that is interested, these seem to get less attention than the PT67 turbos but I've been a little more fascinated by these.... haven't said too much as I've been keeping an eye out for results on these things for AGES which are closer to indicating what to expect for those of us who don't want to have to rely on E85/huge boost for making good power and good spool - found that someone has run one on an XR6T and made really good power relative to boost level on one, despite being on a fairly basic setup with stock manifold etc. 400kw on 1bar on pump gas, for example... and sounds and spools awesome!

So now I'm pretty much convinced this would be a gun turbo for a big power RB that retains some form of streetability, they've made >900hp @ wheels on E85 (American dyno style, but still equates to >600kw @ wheels Dyno Dynamics if you take in account the differences) and pushed various Mitsis into the 8s.

See here:

And thread: http://www.fordxr6turbo.com/forum/topic/78068-boosted-1-in-with-446rwkw/page__p__1166770#entry1166770

Need to somehow fast track finding money to build an RB30DET suitable for such a setup :)

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6320960
Share on other sites
  • 1 month later...
Lithium Grand Master

Lithium

Posted
Posted

So, a 2litre EVO in the USA just put down 570awhp/425awkw on pump gas using a FP GT3794HTA (they did the 1.2 correction trick a lot of UK workshops do to estimate Dynojet/BHP type figures to get 684hp) - pretty impressive result all the same!

Mods:

· FF Shearer HTA3794 kit

· Magnus Intake w/ 65mm TB

· Buschur twin fuel pumps, ID2000 injectors

· Ported head, stock size valves and Kelford 280 cams

· 2.0 Liter Built

· Sparktech Pro CDI

· AEM EMS

Dyno plot:

683Dyno.jpg

Thread: http://forums.evolutionm.net/evo-dyno-tuning-results/616277-shop-fps-hta3794-combine-another-killer-pump-gas-combo.html

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6406068
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted

So its 580rwhp with god knows what air temp, ramp rate or boost.

Cant be compared to anything....... Weigh the car..... run it down the strip.

If its 3000lbs and does 140+ then its about right.

Yeah im always suspect of DD graphs without te most important data visible. In fact we just did a test on a Mainline 4wd Dyno (new) and found quite a few variances in power outputs by changing very little 160rwkw first run r configure then run 200rwkw just by a few keystrokes...just to easy to fudge figures. Need to have the full story with dyno sheets.
Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407293
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted

Cant be compared to anything....... Weigh the car..... run it down the strip.

If its 3000lbs and does 140+ then its about right.

Fair enough, I'll keep the thread up to date with anymore info - its in the US and most people don't trust DD anyway so he is going to re-run it on a Dynojet. They sound like they expect it to do >140mph traps.

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407476
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted

^ yep, that and its running on a 2litre engine - life needs to make as easy as possible to make that kind of power.

Black bnr32, I'd love to see some dyno plots of EVOs making 420+awkw on a Dyno Dynamics dyno running straight 98 using a GT3582R.

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407528
Share on other sites
SimonR32 Grand Master

SimonR32

Posted
Posted

Yeah im always suspect of DD graphs without te most important data visible. In fact we just did a test on a Mainline 4wd Dyno (new) and found quite a few variances in power outputs by changing very little 160rwkw first run r configure then run 200rwkw just by a few keystrokes...just to easy to fudge figures. Need to have the full story with dyno sheets.

I always used to love DD because I think they give more realistic figures compared to hubbers, but after using the dynapac lots now I'm converted. The ability to have such repeatable and consistent results so you can actually compare cars and/or modification effects is awesome

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407882
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...