Jump to content
SAU Community

Gt3794R

Bm3025t

By Bm3025t,
in Engines & Forced Induction

 Share

Recommended Posts

Lithium Grand Master

Lithium

Posted
Posted

Never heard of out, Forced performance do their own hta turbo with a similar name though which I don't know of anyone using on an rb but I recon it would be a good high power combo. I know someone with a 3586hta on an rb30 and it makes over 500kw on e30 with awesome delivery.

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-5917341
Share on other sites
GTScotT Grand Master

GTScotT

Posted
Posted

http://www.skylinesaustralia.com/forums/topic/251820-got-over-400kw-atw/page__hl__over+400kw__st__900

In this thread you will find results from 3788's, try to remember they are bolted onto big budget RB30DET's and not your average forged motor.

Considering there are 4088s and 4094s I have no doubt that garrett has simply mixed and matched some existing parts. IMHO I would expect the 3794 to be a little better under the pedal and make roughly the same power as the 4088. With the 3788 still being the pick of the bunch.

In the GTX thread I already told you to search and that if someone had one it would already be posted. Moving on..

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-5917415
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

They actually seem to push more than 4088rs in the cases I have seen, interestingly enough.

Yeah, power capability of approx the 4294 but the response of something like a T04Z

Only a turbo you would select for making easy 600hp at the wheels or pushed hard to 800hp at the wheels with the right fuel.

We use the 3788 as it's better suited to what we do/need

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-5917518
Share on other sites
  • 9 months later...
Lithium Grand Master

Lithium

Posted
Posted

For anyone that is interested, these seem to get less attention than the PT67 turbos but I've been a little more fascinated by these.... haven't said too much as I've been keeping an eye out for results on these things for AGES which are closer to indicating what to expect for those of us who don't want to have to rely on E85/huge boost for making good power and good spool - found that someone has run one on an XR6T and made really good power relative to boost level on one, despite being on a fairly basic setup with stock manifold etc. 400kw on 1bar on pump gas, for example... and sounds and spools awesome!

So now I'm pretty much convinced this would be a gun turbo for a big power RB that retains some form of streetability, they've made >900hp @ wheels on E85 (American dyno style, but still equates to >600kw @ wheels Dyno Dynamics if you take in account the differences) and pushed various Mitsis into the 8s.

See here:

And thread: http://www.fordxr6turbo.com/forum/topic/78068-boosted-1-in-with-446rwkw/page__p__1166770#entry1166770

Need to somehow fast track finding money to build an RB30DET suitable for such a setup :)

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6320960
Share on other sites
  • 1 month later...
Lithium Grand Master

Lithium

Posted
Posted

So, a 2litre EVO in the USA just put down 570awhp/425awkw on pump gas using a FP GT3794HTA (they did the 1.2 correction trick a lot of UK workshops do to estimate Dynojet/BHP type figures to get 684hp) - pretty impressive result all the same!

Mods:

· FF Shearer HTA3794 kit

· Magnus Intake w/ 65mm TB

· Buschur twin fuel pumps, ID2000 injectors

· Ported head, stock size valves and Kelford 280 cams

· 2.0 Liter Built

· Sparktech Pro CDI

· AEM EMS

Dyno plot:

683Dyno.jpg

Thread: http://forums.evolutionm.net/evo-dyno-tuning-results/616277-shop-fps-hta3794-combine-another-killer-pump-gas-combo.html

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6406068
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted

So its 580rwhp with god knows what air temp, ramp rate or boost.

Cant be compared to anything....... Weigh the car..... run it down the strip.

If its 3000lbs and does 140+ then its about right.

Yeah im always suspect of DD graphs without te most important data visible. In fact we just did a test on a Mainline 4wd Dyno (new) and found quite a few variances in power outputs by changing very little 160rwkw first run r configure then run 200rwkw just by a few keystrokes...just to easy to fudge figures. Need to have the full story with dyno sheets.
Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407293
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted

Cant be compared to anything....... Weigh the car..... run it down the strip.

If its 3000lbs and does 140+ then its about right.

Fair enough, I'll keep the thread up to date with anymore info - its in the US and most people don't trust DD anyway so he is going to re-run it on a Dynojet. They sound like they expect it to do >140mph traps.

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407476
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted

^ yep, that and its running on a 2litre engine - life needs to make as easy as possible to make that kind of power.

Black bnr32, I'd love to see some dyno plots of EVOs making 420+awkw on a Dyno Dynamics dyno running straight 98 using a GT3582R.

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407528
Share on other sites
SimonR32 Grand Master

SimonR32

Posted
Posted

Yeah im always suspect of DD graphs without te most important data visible. In fact we just did a test on a Mainline 4wd Dyno (new) and found quite a few variances in power outputs by changing very little 160rwkw first run r configure then run 200rwkw just by a few keystrokes...just to easy to fudge figures. Need to have the full story with dyno sheets.

I always used to love DD because I think they give more realistic figures compared to hubbers, but after using the dynapac lots now I'm converted. The ability to have such repeatable and consistent results so you can actually compare cars and/or modification effects is awesome

Link to comment
https://www.sau.com.au/forums/topic/371179-gt3794r/#findComment-6407882
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • -Jimmy-
      R32 gtst speedo out by 10kph

      By -Jimmy- · Posted

      Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • -Jimmy-
      My R32 Money Pit & The Headaches That Come With It

      By -Jimmy- · Posted

      Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • Lithium
      Shoota's R33 GT-R RB30/26

      By Lithium · Posted

      This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
×
×
  • Create New...