Jump to content
SAU Community

Recommended Posts

Hi guys im wondering if there is much difference in the tunabilty of the nistune as apposed to the power fc?

Im running a nistune at the moment with stock turbo and all the bolt ons and im currently making 272hp@thewheels or 203kw@thewheels with 12psi boost

Im getting ready for a turbo upgrade a hks 2835 kai and just wondering if there is any advantages going to a power fc over my nistune?

Link to comment
https://www.sau.com.au/forums/topic/371467-power-fc-vs-nistune/
Share on other sites

PowerFC - IMO best to get the D-Jetro, otherwise NIStune hands down. D-Jetro uses a MAP sensor but takes longer to tune. Great to push a little more from your application in terms of tuning but not a big deal .PowerFC can be tuned every 400 RPM

NIStune - Best bang for buck, streetable, knock sensor, limp-home mode and cheaper to tune whenever you make any mod changes. NIstune is tuned at every 500 RPM.

Haltech ECUs can be tuned every 250 RPM but then you need to find a reputable Haltech tuner.

For response, get the Precision 4828, based on the GT2860RS but billeted and cheaper. :thumbsup:

Otherwise you have the 5128 and 5130 to choose from (the miss-matched GT2871R or the efficient GT3071R replacement).They go on of course but so does the lag and cost.

Edited by Ruff Ryda

PowerFC - IMO best to get the D-Jetro, otherwise NIStune hands down. D-Jetro uses a MAP sensor but takes longer to tune. Great to push a little more from your application in terms of tuning but not a big deal .PowerFC can be tuned every 400 RPM

NIStune - Best bang for buck, streetable, knock sensor, limp-home mode and cheaper to tune whenever you make any mod changes. NIstune is tuned at every 500 RPM.

Haltech ECUs can be tuned every 250 RPM but then you need to find a reputable Haltech tuner.

For response, get the Precision 4828, based on the GT2860RS but billeted and cheaper. :thumbsup:

Otherwise you have the 5128 and 5130 to choose from (the miss-matched GT2871R or the efficient GT3071R replacement).They go on of course but so does the lag and cost.

Lots of mis-information there ^^^^

Power FC has never done me wrong. I don't tune the car, I drive it so I don't care what is and what isn't more tuneable. There is a tuner out there who can work with anything so just take it to a reputable nistune/power fc tuner.

If you've got a nistune stick with it, if you got PFC stick with it. If you got stock, its up to your wallet. I'd always go PFC is I was a stock R33/R34. I'm not doing anything extreme with my car, all bolt on mods so a PFC is more than enough. Don't need djetro, never had issues with a Z32.

nistune will pass an inspection, power FC wont.

I'd be choosing it purely on that basis.

You can put the Power FC gear into your standard ECU housing. NIStune is not legal as it is a modified, programmable ECU. Its just because it looks stock. If you do an emissions test, both ECU's will probably fail on regular fuel and mods.

You can put the Power FC gear into your standard ECU housing. NIStune is not legal as it is a modified, programmable ECU. Its just because it looks stock. If you do an emissions test, both ECU's will probably fail on regular fuel and mods.

If you can fit it into the stock housing then thats a good option! Looking stock was the point I was trying to make.

Ok so im not gunna make any substantial power gains with a power fc then?

Best off just keeping the nistune and getting it re-tuned when i get my injector and turbo upgrade then?

Can i get some opinions of good RB25 tuners in sydney who can work wonders with my nistune?:thanks:

regardless of ecu, the car will make xyz RWKW or KW or HP blah blah

there is no legitament reason another ECU will make more power

if it does, the other was not tuned properly

air fuel spark make power not the ecu

pick one that your tuner is competent with

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...