Jump to content
SAU Community

Recommended Posts

Hi guys im wondering if there is much difference in the tunabilty of the nistune as apposed to the power fc?

Im running a nistune at the moment with stock turbo and all the bolt ons and im currently making 272hp@thewheels or 203kw@thewheels with 12psi boost

Im getting ready for a turbo upgrade a hks 2835 kai and just wondering if there is any advantages going to a power fc over my nistune?

Link to comment
https://www.sau.com.au/forums/topic/371467-power-fc-vs-nistune/
Share on other sites

PowerFC - IMO best to get the D-Jetro, otherwise NIStune hands down. D-Jetro uses a MAP sensor but takes longer to tune. Great to push a little more from your application in terms of tuning but not a big deal .PowerFC can be tuned every 400 RPM

NIStune - Best bang for buck, streetable, knock sensor, limp-home mode and cheaper to tune whenever you make any mod changes. NIstune is tuned at every 500 RPM.

Haltech ECUs can be tuned every 250 RPM but then you need to find a reputable Haltech tuner.

For response, get the Precision 4828, based on the GT2860RS but billeted and cheaper. :thumbsup:

Otherwise you have the 5128 and 5130 to choose from (the miss-matched GT2871R or the efficient GT3071R replacement).They go on of course but so does the lag and cost.

Edited by Ruff Ryda

PowerFC - IMO best to get the D-Jetro, otherwise NIStune hands down. D-Jetro uses a MAP sensor but takes longer to tune. Great to push a little more from your application in terms of tuning but not a big deal .PowerFC can be tuned every 400 RPM

NIStune - Best bang for buck, streetable, knock sensor, limp-home mode and cheaper to tune whenever you make any mod changes. NIstune is tuned at every 500 RPM.

Haltech ECUs can be tuned every 250 RPM but then you need to find a reputable Haltech tuner.

For response, get the Precision 4828, based on the GT2860RS but billeted and cheaper. :thumbsup:

Otherwise you have the 5128 and 5130 to choose from (the miss-matched GT2871R or the efficient GT3071R replacement).They go on of course but so does the lag and cost.

Lots of mis-information there ^^^^

Power FC has never done me wrong. I don't tune the car, I drive it so I don't care what is and what isn't more tuneable. There is a tuner out there who can work with anything so just take it to a reputable nistune/power fc tuner.

If you've got a nistune stick with it, if you got PFC stick with it. If you got stock, its up to your wallet. I'd always go PFC is I was a stock R33/R34. I'm not doing anything extreme with my car, all bolt on mods so a PFC is more than enough. Don't need djetro, never had issues with a Z32.

nistune will pass an inspection, power FC wont.

I'd be choosing it purely on that basis.

You can put the Power FC gear into your standard ECU housing. NIStune is not legal as it is a modified, programmable ECU. Its just because it looks stock. If you do an emissions test, both ECU's will probably fail on regular fuel and mods.

You can put the Power FC gear into your standard ECU housing. NIStune is not legal as it is a modified, programmable ECU. Its just because it looks stock. If you do an emissions test, both ECU's will probably fail on regular fuel and mods.

If you can fit it into the stock housing then thats a good option! Looking stock was the point I was trying to make.

Ok so im not gunna make any substantial power gains with a power fc then?

Best off just keeping the nistune and getting it re-tuned when i get my injector and turbo upgrade then?

Can i get some opinions of good RB25 tuners in sydney who can work wonders with my nistune?:thanks:

regardless of ecu, the car will make xyz RWKW or KW or HP blah blah

there is no legitament reason another ECU will make more power

if it does, the other was not tuned properly

air fuel spark make power not the ecu

pick one that your tuner is competent with

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
    • Stock bypass valves are good for plenty of boost.
    • Check for fuel flow out of the outlet end of the rail. Check for spark. Try to start with aerostart (or pressure can brake cleaner or similar solvent in a car) prayed in through TB. If you have fuel and you have spark and it will fire on substitute fuel, then seriously suspect that E85 sitting for ages in your fuel system has destroyed something and put it in your injectors.
    • Nissan stock oil pressure is typically about 1 bar at 1000 rpm plus about 1 bar per thousand revs on top.
×
×
  • Create New...