Jump to content
SAU Community

Recommended Posts

Hi Guys,

I recently bought a MY99 WRX that has had an insane amount of work done to it and I am getting the final things done to pass a regency inspection so I can register it in SA. Unfortunately it looks like I might have to more interstate and I would like to get an expression of interest in selling it to cover the financial costs of moving.

So get a coffee, this could take awhile!

All engine mods done by Croyden Racing Development

ENGINE:

Fitting an EJ25 (2.5L STi engine) not sure if it was just the short block or the full motor, engine number available on request

CP FORGED PISTONS

RACE SERIES ENGINE BEARINGS

ARGO CONNECTING RODS

FMIC WITH CUSTOM RUBBER PIPING

TURBOSMART PULMBED BACK BOV

SARD INJECTORS

EXTREME CLUTCH KIT

SR40 TURBO

UNICHIP

ENGINE WAS BORED, HONED, BALANCED, LINISH CRANK, MILL BLOCKS, CHEMICAL CLEAN

RECEIPT TOTAL (NOT INC TURBO AND INTERCOOLER): $13, 508

GEARBOX:

ALL GEARBOX WORK DONE BY MRT PERFORMANCE (AGAIN WITH RECEIPTS)

1 TO 4 PPG STRAIGHT CUT GEARS WITH SYNCROS!

RECEIPT TOTAL: $9790

BRAKES:

BREMBO STI BRAKE UPGRADE! (GOLD CALIPERS)

326X30MM FRONT ROTORS

316X20MM REAR ROTORS

RECEIPT TOTAL: APPROX JUST UNDER $4000

INTERIOR:

FULL CUSTOM CREAM LEATHER

EBOOST WITH 12, 15 AND 18PSI SETTINGS

CUSTOM INTERCOOLER SPRAYER WITH BOOST ACTIVATION

EXTERIOR:

GLOSS BLACK 18INCH RIMS WITH LOW PROFILE TIRES (90% TREAD ON ALL 4)

STI LIGHT COVERS AND BADGES (NOT MY IDEA)

BAD POINTS:

CLUTCH IS ON ITS WAY OUT, they uses a lighter clutch to preserve the box being 4WD and all

BODY HAS A FEW DENTS

ROOF HAS PAINT FADING

BOOT LEAKS A BIT

Thats all I can think of now guys, I am sure I will finish this and think of way more but its late haha!

Any questions feel free to ask and remember it is only EOI atm, that said any input on price would be much appreciated!

ASKING PRICE = $16,000+ located in Adelaide

photo-3.jpg

Link to comment
https://www.sau.com.au/forums/topic/371505-eoi-forged-my99-wrx/
Share on other sites

Sounds nice mate could u send more pics 2 [email protected]

Cheers Deane

Hey mate, emailed you but I am hesitant to email hotmails just because I have had alot of scammers. What did you want pictures of?

  • 2 months later...
  • 1 month later...

Have the dyno sheet of 206 AWKW's running on a mix of 98/95 unleaded on a 38 degree day! Also I think the AFM might be covered in filter oil, so I need to clean that and it should make about 220 AWKW's.

Going to register it over the next few weeks and after that it will be off the market. However, until then I will take $13.5k NOT NEGOTIABLE!

After a R32 GTR swap + cash your way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...