Jump to content
SAU Community

Recommended Posts

I've posted lower quality pics to keep file sizes down, so sorry if they look a bit dodgy.

A mate of mine T-boned a Commodore on his recently-purchased R6 - the guy pulled out of a side street and he had nowhere to go. The guy in the Commy was completely uninjured, but my mate has a broken wrist, sprained ankle, a few stitches in one shoulder and numerous grazes, bruises, cuts etc all over him. The police apparently measured the distance he was thrown - 9 metres before he hit the ground. He's actually very lucky that he landed mostly on his head, as he wasn't wearing leathers at the time, and his helmet absorbed a lot of the impact. There is a hole left around where one of the plastic vents used to be, but other than that it's remarkably intact. The guy got out of his car and the first thing he said was the almost clich茅'd "sorry mate, I didn't see you" :( Bright blue bike with the headlight on, in the middle of the day... right...

When we went to the holding yard for these photos, they couldn't believe he wasn't either killed or, at the very least, still in hospital... and this coming from people who see crashes all the time. Looking at the pics, it's easy to see why. He is one VERY lucky bloke.

Please PLEASE keep your eyes open for other vehicles (particularly bikes) on the road. I'm sure anyone who rides bikes will tell you that they've had near misses very similar to this at least once or twice, it's unfortunate that sometimes it ends like this.

As the police are still making their investigations I won't be commenting further on specifics.

Ride/drive safe people.

Lucky it didnt turn out worse, best of luck for a full speedy recovery.

I im looking to buy a bike was wondering if you could PM any helpful info as I dont think here is the appropriate place to ask (just noting your signature) Im looking to spend 5-7k on a bike, that is learner permitted ie not over 600cc, probably around 250 im lookin4. Thanks

the other night right in front of me as i stopped at a red light .. some woman turning right didn't give way and she hit a guy on a bike going in the opposite direction ... he went flying 5 meters or so... i went out with a couple of other people and helped him ... called the ambulance ... didn't look like he was very hurt but he couldnt' move ... gave him my details and he called me up the other day ... said he had a broken shoulder, shattered kidney, his liver was torn and some other things ... he wasn't really wearing much protection gear either ...

I have a R1 , big bore kit,Yoshi RS-3 Pipe,better rubber,clear indicators all around etc..

i hardly ride it now since its cold.. but i am no the person who rides one in the backstreets. i usualy love riding on highway its allot more safe.. people just dont even look out whenyour riding a bike.. they are real dumbasses..

i have all the gear but only wear it sometimes lol..

Rossi Helmet ( was like 800$ )

Rossi Hard jacket ( 1100$ ?? )

rossi gloves ( $???)

rossi pants ($$???)

Alpinestars boots ($??)

anyway.. you need all the gear when riding a bike its for safety not for looks..

when you come off a bike without gear you can rip apart your stomach and even break bones.. i hear with the full gear you have like 70% less chances of getting injured as bad..

RIDE SAFE... bikes are the most fun things around .. ( BESIDES GO KARTS ) :stupid: hehe

This all happened in a 60 zone - goes to show how much damage can be done at even a relatively low speed. He wasn't speeding, we're confident that recently installed traffic surveillance cameras (it's a bit of a black spot) and the acco investigation people will prove that, so he'll be right in that regard.

Please don't look at this as a reason not to ride a bike! I've worked in hospitals for the past six years and I've seen some horrific injuries, but I'm still perfectly happy to ride a bike. Why? Partly because I think life would be pretty boring if you wrapped yourself in cotton wool all the time, partly because I accept the increased risk as a part of riding a bike, and partly because many of the bike-related injuries are self-inflicted. That doesn't make them any less severe of course, but it does mean that they were, more than likely, preventable.

In general, riding a bike is only as dangerous as you make it. Cases like this prove that you can't always predict when something is going to happen, but you can reduce the chances of coming off by your own fault by making sure you look after #1. I always try to predict what other drivers are going to do, look at sidestreets and set up and escape route just in case someone pulls out without looking, make sure I have a way out if the Volvo beside me suddenly changes lanes, the list goes on. I've found that this is by far the safest way to ride, and I think it has improved my (car) driving too.

There are always ifs and buts in this situations, but it's certainly not going to stop me or anyone I know from riding.

Thanks for your concern guys, I'll be passing them all onto him. Although he's OK, he's still pretty shaken about the whole thing (he spewed on the ground a few times when we went to look at the bike) so these kinds of messages will help him get over it :/

PS I was wondering how long it'd take for someone to notice the 33 :stupid:

Dunno, it was just in the same holding yard as my mate's bike. It had backed into something fairly solid (like a power pole) at a decent rate of knots, just to the right of the centreline. The rear bar was almost level with the back of the parcel tray at the point of impact. Ouch.

Hrmm.. yer hope the dude recover well..

There are some really stupid/crazy people that drives on the road, so far I've had a lance n a magna tried to wipe me out *sigh* There must a something about mitsubishi cars against mine.. :(

As to giving extra care to motorbike riders I just treat them like any other motor vehicle, tho some motorbike dudes are just plain silly. ie. going high speed between cars, riding with just a T-Shirt. *shakes his head*

Just my 2c worth. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 馃
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
  • Create New...