Jump to content
SAU Community

Recommended Posts

Hey all, my cousins r32 got stolen last night out his driveway in Ferryden Park area.

Its a black r32 2 door, with a silver bonnet. Has 350z wheels and a GTR front bar.

It also has VIC plates. Plate number is: YKL 179

If anyone see's it around, PM me or message either one of us:

0422164665 or 0401751775

Any help would be highly appreciated.

Thanks guys

Ive been hearing a fair bit of his happening of late..

Link to comment
https://www.sau.com.au/forums/topic/371631-stolen-r32/
Share on other sites

holly crap, I have been off the forums for 2 weeks and i come back to just threads and threads of cars being stolen. The cops have to surely do something about this by now.

trying to imply something krishy :P

sucks to hear, so many of late getting taken, happy i no longer have one to an extent

Link to comment
https://www.sau.com.au/forums/topic/371631-stolen-r32/#findComment-5933834
Share on other sites

Yeah, you'd think all the people would learn from the others getting their cars stolen and ensure they had insurance, car alarms, kill-switches, etc .. and yet we still see cars getting stolen without 'em ..

Guess that old adage about 'live and learn' isn't so true afterall ..

(And yes, I recognise cars can still get stolen with the above measures in-place, and if the thieves want the car bad enough they'll get it. But hey, when there are so many options for the thieves where the owners don't bother? ..)

Link to comment
https://www.sau.com.au/forums/topic/371631-stolen-r32/#findComment-5936647
Share on other sites

  • 3 weeks later...

Car was picked up today.. Surprisingly the car wasnt damaged at all.

Found that the car was sanded back (getting ready for respray i guess) Wheels were primed, front bar was off and in the car.

Had a diff set of plates on it, seems like they were driving it around.

Just glad that its all in one piece

Link to comment
https://www.sau.com.au/forums/topic/371631-stolen-r32/#findComment-5967999
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is the clearest explanation out of those: Page 77: Turn the crankshaft clockwise two full rotations with the tensioner pulley installation bolt in a loose condition. Insert a wrench into the tensioner pulley hexagonal hole to fix the tensioner pulley in place, then tighten the installation bolts. Tightening torque: 43–58 N·m (4.4–5.9 kg·m). The timing belt tension should be at the correct tension. Basically you turn the engine with the tensioner bolt loose, then use the allen key to hold it while you torque it up. And yes after that a good guide is being able to twist it 90o in one of the long free lengths of the belt
    • good choice....I have a set of those and use them all the time including on this job. Plus, no-one wants a damaged nipple
    • Thanks all, went with nismo strengthened belt and all genuine nissan idler and tensioner Question on RB25DET Neo Timing Tensioner: I have a question about the RB25DET Neo timing tensioner. In one of the videos (minute 20 of https://www.youtube.com/watch?v=17y37BB9xnA and minute 27 of https://www.youtube.com/watch?v=Pb99s2E9xUg), the process suggests tightening the tensioner pulley installation bolt to the specified torque initially, and then loosening it slightly to allow the spring to set the correct tension. Is this the correct approach? The R33 workshop manual on page 74 states: Loosen the tension pulley installation nuts. Insert the wrench into the tensioner pulley hexagonal hole and turn it clockwise to tighten the installation nut temporarily. The way this is written is confusing. Does this mean: Undo the nut, then reduce the tension by turning clockwise? Snug the nut so it stays in position without applying tension to the belt while removing the timing belt? The manual wording makes it sound like the nut will tighten automatically when you turn the tensioner clockwise , which is unclear to me.   Timing Belt Tension Adjustment Process: After loosening the tensioner nut, you turn the engine two full rotations by hand, which should set the correct tension. Once the tension is set, you tighten the bolt to 43 N·m (4.4 kg·m). Before tightening, you need to insert the Allen key into the hexagonal hole to hold the pulley in place while tightening the bolt. In one of the videos, it’s mentioned that you should twist the belt side to side, or turn it slightly to check if the tension is correct. The belt should turn halfway, indicating the right tension. However, I know that twisting or turning the belt is not a good idea. What are your thoughts on this? Finally, how can I ensure the belt isn’t overtightened? I’ve seen many cases where people have overtightened the timing belt.   Manual Excerpts: Page 74: Loosen the tension pulley installation nuts. Insert the wrench into the tensioner pulley hexagonal hole and turn it clockwise to tighten the installation nut temporarily. Remove the timing belt from each pulley. Page 77: Turn the crankshaft clockwise two full rotations with the tensioner pulley installation bolt in a loose condition. Insert a wrench into the tensioner pulley hexagonal hole to fix the tensioner pulley in place, then tighten the installation bolts. Tightening torque: 43–58 N·m (4.4–5.9 kg·m). The timing belt tension should be at the correct tension.
    • Takes a few minutes to malke one. Wood, or steel, or a wrap strap with some strategically placed solids to provide teh drive onto the ribs.
×
×
  • Create New...