Radiator Breather Tank Plumbing.

[DaveO74]

Hey guys,

Ive put a plazmaman plenum onto my 33 gtst and because I've lost the bleed point I decided to connect up a breather tank/swirl pot that I've had sitting in the shed for years.

On the return line that runs from the bottom of the breather tank to the lower rad hose I was thinking of putting the connection upside down as it sits on a 45 degree angle and if I have it facing upwards (towards the bonnet) the hose will probably kink once hot due to how it is angled

Do you think having the nipple on the rad hose pointing downwards towards the ground and then having the hose run up to the breather tank would cause any problems???

It may be a stupid question but I'm just unsure wether gravity would work against me say when the car is off and then with pressure over fill the tank if that makes sense.

I will post up a couple of pictures tomorrow to help explain what I mean.

Thanks

[STATUS]

should be fine, had similar setups work fine. The bottom hose take off point is not the important one, its the top two (not the overflow) on the breather tank which do all the magic.

[DaveO74]

Thanks Trent just wanted to be sure