Jump to content
SAU Community

Rb 26 Rebuild

gtr_23qu

By gtr_23qu,
in Engines & Forced Induction

 Share

Recommended Posts

gtr_23qu Enthusiast

gtr_23qu

Posted
  • Author
Posted

Kyle , I have all the photos and receipts from when i bought the car from beer baron all up this engine has done 42, 000 kms from when it was installed as brand new engine , if you did buy it all this information will go with the engine . Aaron.

yea sweet well like i said i gave andrew a call and the motor wont be checked until next week so im hoping it will be given the thumbs up and ill come get it next friday :)

Beer Baron Grand Master

Beer Baron

Posted
Posted

Kyle , I have all the photos and receipts from when i bought the car from beer baron all up this engine has done 42, 000 kms from when it was installed as brand new engine , if you did buy it all this information will go with the engine . Aaron.

Hey Aaron, I thought I had passed all the stuff on. I was sure you'd keep it all :) Glad to see you on the forum.

If there is anything I can do for you mate, please don't hesitate to ask. So sorry to hear you were involved in a crash through no fault of your own. I know you treated that car very well and i'm sure the engine has plenty of life in it yet. You have the receipts so you know what that engine cost so I hope you get a good price for it. It was a great set-up for a street car. The car itself was probably the nicest R32 I've owned and i've owned about a dozen. I'd say it's as nice or nicer than the one I've got now which I plan to keep for a long time.

As to gtr_23qu's question on power the engine builder was told it needed to handle 600hp but honestly a decent stock motor will handle that. The base N1 Nur engine is supposedly rated to 600hp anyway but this one was blueprinted and has a 1.2mm tomei head gasket fitted. I would be comfortable pushing it to 400kw atw+ for a street car. It has a few key bits that will enable it to handle some decent boost and power.

gtraaron Mentor

gtraaron

Posted
Posted

yea sweet well like i said i gave andrew a call and the motor wont be checked until next week so im hoping it will be given the thumbs up and ill come get it next friday :)

You dont know how much i want for it yet , you might not want it then :)

Beer Baron Grand Master

Beer Baron

Posted
Posted

lol, well I know what it cost and it's not cheap. N1 block, N1 oil and water pumps, ported head, N1 pistons, tomei head gasket, tomei timing belt, all blue-printed and all other bits are brad new down to ever last nut/bolt/seal whatever. a lot more than what is replaced in the average rebuild. hope you get good money for it Aaron. :)

gtraaron Mentor

gtraaron

Posted
Posted

lol, well I know what it cost and it's not cheap. N1 block, N1 oil and water pumps, ported head, N1 pistons, tomei head gasket, tomei timing belt, all blue-printed and all other bits are brad new down to ever last nut/bolt/seal whatever. a lot more than what is replaced in the average rebuild. hope you get good money for it Aaron. :)

Hey Rich , i have already told him a price so it looks like someone is getting a bargin at this stage >_<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...