Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Retrofitting a dual clutch autowunderbox would have to be a fairly significant challenge. I'd go out on a limb and suggest that it would be nigh on impossible to achieve it without considering a complete R35underR32 transplant to get all the systems present and accounted for. Budget - very very large.

So, assuming that you want something better than an H pattern box but can't really afford to spend the $100k or so to put the R35 stuff in, then the most realistic option is that you'd be looking at a Hollinger sequential. And really, it's unlikely you could afford that either.

Edited by GTSBoy

Retrofitting a dual clutch autowunderbox would have to be a fairly significant challenge. I'd go out on a limb and suggest that it would be nigh on impossible to achieve it without considering a complete R35underR32 transplant to get all the systems present and accounted for. Budget - very very large.

So, assuming that you want something better than an H pattern box but can't really afford to spend the $100k or so to put the R35 stuff in, then the most realistic option is that you'd be looking at a Hollinger sequential. And really, it's unlikely you could afford that either.

I have just spent close to 7k on labour and Osgiken 5 speed box, noisy but very tough im not looking to change it anytime soon but its just a question, how can you possibly match the speed on the gear changes that the r35 can do, as thats the main advantage of that car

Edited by GTRAAH

Well, that's the reason I was saying that it would be a massive exercise verging on the impossible. That whole interaction between the gearbox and engine needs to be replicated, and so you'd need to come up with an engine management solution for the RB that would do what is needed, and have all that fine tuning and development work done that has probably cost Nissan tens of millions of dollars to get right (as of the 2011 R35 release). Tough ask.

of course not but im saying a 650hp rb26dett will be much much driveable with that transmission and alot quicker

A 650hp 26 will never be nicely driveable :P

You've got lag to content with, the R35 simply doesn't.

Gearing is also another factor you'd need to think about. A 35 box is designed around its weight, torque/power range and gearing...

A 2.6ltr will be very different.

Realistically if you want lightning fast shifts you need a hollinger, or a manualised auto or something.

-5 arent that laggy. I feel its easily driveable and i have close to 500hp yeh i know 650hp are probably close to those turbos limits. So what can you do to put a manualised auto? has anyone ever done it? and what makes a hollinger quick shift? My future plan is to convert it to a RB30DETT with the -5's i heard tha its a very nice mix. Another question now im getting off the topic sorry lol But once you convert it to a rb30dett can you bore it out to 31 or 32 getting closer to the 3.8lt r35 :) Plus its much lighter so that should make up for the extra few hundred cc's

A 650hp 26 will never be nicely driveable :P

You've got lag to content with, the R35 simply doesn't.

Gearing is also another factor you'd need to think about. A 35 box is designed around its weight, torque/power range and gearing...

A 2.6ltr will be very different.

Realistically if you want lightning fast shifts you need a hollinger, or a manualised auto or something.

Edited by GTRAAH

lol no i just like response. You'll never get a 2.6l/650hp, responsive.

You'd need to get a massive stroker for that.

What would you say if my T78 RB26 was on full boost (24psi) by about 4000rpm and makes 460rwkw on 98. The car runs 135mph so its making decent power. Thats about 500rpm more than a stock RB26.... or is your idea of response full boost at 3000rpm

Isn't the 35 box at the rear of the car (for better weight distribution) like a transaxle? As far as I can tell everything on the 35 is built for the 35 alone. Oh the headaches.....

Re response- 2.6 RB with low mount twins, 400rwkw on 18psi, on pump fuel, full boost by 4000rpm with enough meaningful boost between 3000-4000 (10psi from 3000rpm) to make a substantial difference, has more power here (3-4000rpm) than stock and therefore actually feels more responsive than stock. (and yes I drove it and a stocker back to back to check). Also runs Motec which made big difference. Everyone's got a preference so...........

Buy an R35?

Im keeping my 94" GTR32 for life! It will be my hobby to experiment. Not worth selling... slowy slowy it will fully customised to my perfection interior exterior and engine. One day i might buy the r35 but till then my gtr 32 is my baby. I just cant get enough of the feel of it. maybe in 20 years when i open he garage and its in 100% condition body will still be 97% Original but the interior will be highly futurised. It might open some eyes when i drive it out on sunday cruises lol. It is not my daily driver and will never be.

If you want to get closer to the 3.8L mark, just move to an FG XR6 motor.

No i aint letting go on of the RB if anything i will build on top of it till it cant take no more then build around it to keep it healthy then garage it and take it out on special outings and cruises. Never selling it!!! i dont look at the car as money its my hobby. I will never be at the point where ill say i need money i need to sell it. Its not money to me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
    • Twas your car many moons ago that gave me the idea!
×
×
  • Create New...