Jump to content
SAU Community

Recommended Posts

Here's a short story:

Just took the skyline for a quick spin to try a new fuel map.

When there was no traffic I floored the pedal a bit more (about 4000rpm) ...

The car started to move forward and came on boost - suddenly - BANG!

Yes! BANG!

:wacko::unsure:

OMG! (It was a very loud BANG!!!)

What had I done?? (my fuel map wasn't that bad, was it????)

I rolled (engine died off) to the left and opened the bonnet, but I could see no damage ..

So I started the engine again (and secretly hoping that everything would be fine)

, but it ran very, very poorly.

Also I could barely keep the revvs over 3000rpm and the engine would die off often.

The car made a lot of black smoke and noise either ...

A nightmare!

In 3rd gear and with a lot of smoke and sweat I made it somehow home.

(I was just 3km away anyhow)

With a flash-light I checked under the car and could find no oil leakage or obvious damage.

Again I opened the bonnet and there it was ->

The newly fitted hose joiner had come off .. :)

PHEEEWWWW! Seems it is my lucky day!

(Thanks for listening)

post-33912-0-48768200-1311446691_thumb.jpg

post-33912-0-53949600-1311446706_thumb.jpg

Edited by Torques
Link to comment
https://www.sau.com.au/forums/topic/371877-i-thought-i-had-blown-the-engine/
Share on other sites

Ohhh ... I see what you mean!

Thanks!!

Given where the clamps are on the hose, and how long the pipe/lip is - doesn't look like it was done up correctly.

Make sure you get the clamp behind the lip this time around.

:)

It was my first time ;), and I just recently fitted a new turbo ..

So I really thought something massively wrong has happened :)

Obviously I made a mistake while mounting the clamps..

Nonetheless interesting to see that there is actually much pressure at work ..

I will have more respect now for the PSI figures!

Yeal lol thats happened to me heaps of times so loud you instantly think shit what have i done then the csr idles like a rotary.

pretty common occurrence

you can unplug the afm if that happens, it will limit revs to about 2500 but it drives a bit better than with it plugged in (reverts to a default map)

one time my r32 spat the whole lower half of the hot-side pipe (from under the airbox to the fmic) into the bushes

i couldn't find it so i had to limp it home :(

wait till you get one come half off, it runs like shit on boost but idles fine and drive fine off boost and cause it only came half off you can't see it easy and have to pull half the friggin car apart to find it was the one that joins the back turbo to the front one :rant:

I blew my cooler hose going through the NATO park near stanwell tops, I also herd the bang and black smoke, All my intercooler pipes seemed fine and I started to worry that it was something else, I decided to remove my front bar on the side of the road (had to wait for dad to bring tools which took him 2hours to get to me) and the pipe going into the passenger gaurs was off.

Massive pain in the ass especially if it's hard to get too !

How good is it though when you find it - that sense of relief that it was nothing serious :) Although the bogans in falcons/commodores flying past while your bonnets open and they scream out piece of shit skyline is annoying

time to invest:

GBS-LRG.jpg

i've never once had a cooler pipe blow off in 4 years, last 2 years at 20+psi. best clamps ever, apart from those fancy wiggins ones....

Use these, everything else sucks.

Agree that blowing a cooler pipe off scares the shit out of you, sounds like you put a piston through the block and then it won't idle, worst feeling ever.

Hi,

Yes, now that I know it is common it is -> LOL, but yesterday it was -> OMG!

I have a Nistune ECU and I was trying a new map ..

LOL good read, very common.

Get that car tuned properly with the new turbo as the stock ecu may just blow your motor.

That's good information, had I know I would have had less stress ..

It was difficult keeping the engine alive and it would not take any load at all.

pretty common occurrence

you can unplug the afm if that happens, it will limit revs to about 2500 but it drives a bit better than with it plugged in (reverts to a default map)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I think my main complaint with your idea is that there is a veneer of idealism spread across it. You want the simple numbers to make it easier, but all they will do is make it easier for someone to come to the wrong conclusion because the fine details will kick them in the nuts. As it is right now, the tiny bit of arithmetic is NOT the obstacle to understanding what will fit and what will not fit. The reality of trying it is what determines whether it will fit. If you had a "standard rule" that R34 GTT guards have that magic 100mm space from the hub face to whichever side you were worried about, and someone said "excellent, this wheel is only 98mm in that direction, I'll just go spend $4k on them and jam them on my sick ride".....they would just as likely find out that the "standard rule" is not true because the rear subframe is offset to one side by a fairly typical (but variable) 8mm on their car and they only have 92mm on one side and 108 on the other.
    • It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
×
×
  • Create New...