Jump to content
SAU Community

Keen To Learn About The Gtr


Ruxis
 Share

Recommended Posts

Not at all.

Solar is worth it but you have to be prepared to spend up on a bigger system. 1.5kw systems are useless. When purchasing solar, go the biggest you can possibly afford, and then beg borrow and steal to go a bit larger again.

The average household uses ~20kw/h per day. A 1kw system (in Vic) will generate, on average, 3.5kw/h day. So a ~4kw system will produce around 14kw/h day. That's near enough to 75% of the average daily household, so a 75% cut to CO2 output from home electricity use which is significant.

From a financial perspective, it depends on where you live. In Victoria, you get a premium feed in tariff for every kw/h you export back to the grid. So the inverter on the system is wired into the switchboard which means your home will use the power first, then excess will be exported. This has the extra affect of encouraging households to reduce consumption. So not only does it produce CO2 free power (average 75% of a homes usage) it also encourages households to reduce usage.

As an example, one system I sold went on the roof of a home of four (2 adults, 2 children) which had an average use of 14kw/h day. Since it went in (just over 12 months ago) it's offset their entire electricity and gas bill AND seen them receive around $2,000 in refunds from what they exported. Their system is 4.08kw and cost ~$13000. So return thus far is around $3500-$4000 for the year. That will slowly fall off, but the system will pay for itself in around 4 years. After that it's ~$3,000pa return. Not bad. And CO2 is reduced significantly.

Each state has it's own rebates and tariffs, so this above is for Vic. You're in Shellharbour, is that SA? I believe they have a $0.40 feed in for exported, similar to Vic. NSW had a gross feed in tariff which was just stupid. All generation was paid at 60c for systems up to 10kw. It was unsustainable and did not encourage reduction in usage and resulted in an explosion in installs, many of them dodgy. A 10kw system in the right spot could return you $15,000 pa which was never going to last.

My recommendation for anyone installing solar is the bigger, the better and pay more for a reputable company. Also, German and Aussie made does not mean good, it means expensive. Go with Chinese panels. They are as good as any and half the price. As for inverter? That's tough. Aurora, SMA, CMS, Aerosharpe(if on a tight budget), Xantrex and there are probably one or two other decent ones on the market now, but they are the pick.

EDIT: I see you're in NSW. The Premium feed in tariff is no longer available, so solar is questionable from a financial perspective. Environmentally, yes, financially you're looking at ~10 year pay back, which still isn't terrible, but it's not great.

Edited by Cowboy1600
Link to comment
Share on other sites

Thanks for the info :).

Yeah new so I might have to stretch the truth, Base my talk as if it still has the 60c rule. My dad has the 60c rule then got more with the 0c rule hah. All they do is turn back our clock.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...