Jump to content
SAU Community

Recommended Posts

i am selling my 1997 rs4 stagea, its white, auto, rb25, 115,500kms, 2 12 inch pioneer subs, panasonic head unit, genuine stagea floor mats, 19 inch chrome mags and also 16 inch original mags. 3 inch exhaust from turbo back with varex remote control cannon. white pearl paint (silky snow i think), has dual sun roofs

Bad points: it has asuspected cracked piston ring in cylinder 1, has had a leak down test whichshowed the cylinder having lower compression with air leaking past the pistonand not the valves (about 20psi lower than the other cylinders), have added aoil catch can to collect any blowby temporarily. Turbo has blown, have not yetinspected but i believe it needs replacing completely. Has some very minor dents inroof from hail. Has minor damage on front passenger side of vehicle (bumper only, Quater panel has been repaired) as well assome other minor scratches etc on bodywork. Currently has 19 inch mags of which2 have hairline cracks and slowly leak, also has a set of the standard 16 inch mags which needcleaning. The motor does start and run smooth and doesn't blow any oil whenidling or being driven sensibly.

The car is being sold in emerald qld as is where is for $2500

will be getting some photos together

For Sale.pdf

Link to comment
https://www.sau.com.au/forums/topic/372196-white-rs4-stagea-2500/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
×
×
  • Create New...