Jump to content
SAU Community

Recommended Posts

^ that's exactly what i was going to point out.

its the higher boost that is making more power, and all the E85 is doing is alowing more boost to be run without detonation.

I think my GTR could make near that if it were able to hold 25psi boost, but it seems to peak at 25 then trail off to 20psi

Anyway's, will see what it does on the dyno this weekend

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/3/#findComment-5957269
Share on other sites

^ that's exactly what i was going to point out.

its the higher boost that is making more power, and all the E85 is doing is alowing more boost to be run without detonation.

I think my GTR could make near that if it were able to hold 25psi boost, but it seems to peak at 25 then trail off to 20psi

Anyway's, will see what it does on the dyno this weekend

Are you running standard or aftermarket actuator / wastegate springs? Judging by Donnans HPI article, youd see some good results with a stiffer spring!

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/3/#findComment-5957406
Share on other sites

Are you running standard or aftermarket actuator / wastegate springs? Judging by Donnans HPI article, youd see some good results with a stiffer spring!

I've got 14psi actuators from memory? i remember when i had them fitted to the std motor the tuner had to just run wastegate tension because when they were plumbed in boost would hit 18psi.

i've got an Turbosmart E-Boost Street, so it should be able to control boost well enough. might just need some fiddling with the settings to control the wastegates better?

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/3/#findComment-5958590
Share on other sites

shouldn't i just be able to have the wastegates tightened to hold more boost?

i think they're adjustable, they have a threaded rod which looks like you can tighten of loosen to adjust when the wastegate cracks open.

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/3/#findComment-5958653
Share on other sites

yeh go speak to jason at mtq.

my external gate hold 20psi flat, put 25psi through it and it bleeds back to 20psi, fitting a stiffer spring will mean boost holds and it bosst will come on earlier too :)

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/3/#findComment-5958676
Share on other sites

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...