Jump to content
SAU Community

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

sorry, i take that back, shouldn't really be bagging out people who i don't know yet.

but hey, that's what this thread is all about; allowing me to know more of you guys so i can!

its alright michael.

these raging poofs are just jelly of my wheel

R31Nismoid,

Btw you don't live near smith st do you? I think I've seen an R33 GTR there once or twice over the course of 4 years.

I do, but I'd be fairly certain it wouldn't be mine. I don't park it on the street as I have secure parking.

Plus I see at least 10 other skylines regularly, let alone those passing through :)

its alright michael.

these raging poofs are just jelly of my wheel

You get lost on cruises FOLLOWING the car infront...

There is no aeroplane jelly here, least of all of a black car with blue wheels :yuk:

Like that double slap momo poos?

Mm89 keep an eye out in november, thats when I get my license back and il be organising alot of apple peel meets like I used to before I lost it.

Used to get great turn outs and a huge varity of skylines with a good bunch of people.

hahahaha post of the day

Welcome Michael, I'm in the north so might see you around

Hey Ric,

I see a few 33 gts-t's around mill park, a silver one which I always see driving past when I'm having a smoke out the front. Keep thinking it's my friend cos he has a silver s2 as well. I also see this clean white one in bundoora too. What suburb do you live in?

Since there's a few people who are aware of this thread, I might take this opportunity to ask whether people are comfortable with having a small tea party(coffee somewhere) on week nights. I find week nights to be better for less police attention, not that we should be doing anything that attracts it anyway, but in reality, skylines (once again, not ruling out the other cars :P) can be more of a common target for cops regardless. Preferably small numbers so it doesn't get to the point where everybody is just talking to their own mates. 10 people give or take work well.

I have a few places in mind and am open to suggestions

1) Garage cafe - closes early though

2) Doncaster pancake parlor

3) Brunetti's lygon st.

4) stuzzi's in northcote.

My suggestions are based on parking being within close proximity so everyone can have a peace of mind.

Cheers

Michael

You get lost on cruises FOLLOWING the car infront...

There is no aeroplane jelly here, least of all of a black car with blue wheels :yuk:

Like that double slap momo poos?

lol i would hate to admit it but when we pulled over on the side of the road, i had to piss sooooooo bad. so go around the corner and unleash a torrent on someones fence. then i hear the sound of multiple RB's starting up and pulling away. i sprint as hard as i can and get back to the car and speed off using the sound of the others as a guide, i catch up and am following leigh. leigh pulls over. i stop to check if hes alright, thus losing the others. ended up finding alex and some of the others that were also lost lol

my suggestion.

Is to go drive a few 32Rs and then you will officially want one. I used to have one, and living in the north, without secure parking means well, my car went missing about a month after i moved here. I really should have continued staying in the east, but hindsight is always 20/20.

i'm getting a soarer on saturday, so cant help you with the test ride. but i'm always keen to meet new people..

I do, but I'd be fairly certain it wouldn't be mine. I don't park it on the street as I have secure parking.

Plus I see at least 10 other skylines regularly, let alone those passing through :)

Ahh fair enough. I can swear on a left one that I've seen a 33gtr driving past me when I left work once. I couldn't tell if it was black or MP cos it was getting dark when I clocked off.

But yeah, I'm sure you've seen that grey evo 8mr around too. Looks gorgeous but still a cheater's car :P

Funny you say you see many skylines roaming around that area; I must be coming out at the wrong times!

Hey Ric,

I see a few 33 gts-t's around mill park, a silver one which I always see driving past when I'm having a smoke out the front. Keep thinking it's my friend cos he has a silver s2 as well. I also see this clean white one in bundoora too. What suburb do you live in?

Since there's a few people who are aware of this thread, I might take this opportunity to ask whether people are comfortable with having a small tea party(coffee somewhere) on week nights. I find week nights to be better for less police attention, not that we should be doing anything that attracts it anyway, but in reality, skylines (once again, not ruling out the other cars :P) can be more of a common target for cops regardless. Preferably small numbers so it doesn't get to the point where everybody is just talking to their own mates. 10 people give or take work well.

I have a few places in mind and am open to suggestions

1) Garage cafe - closes early though

2) Doncaster pancake parlor

3) Brunetti's lygon st.

4) stuzzi's in northcote.

My suggestions are based on parking being within close proximity so everyone can have a peace of mind.

Cheers

Michael

Shisha cafe bridge rd ^^,

Mm89 keep an eye out in november, thats when I get my license back and il be organising alot of apple peel meets like I used to before I lost it.

Used to get great turn outs and a huge varity of skylines with a good bunch of people.

Hey mate, sorry to hear about your loss of licence, I look forward to coming to an apple peel car wash night, cos I saw pics from the most recent one which I just conveniently missed :( and my oh my was the turnout awesome, that blue bnr34 with black te37's was frothing material!

Mm89 keep an eye out in november, thats when I get my license back and il be organising alot of apple peel meets like I used to before I lost it.

Used to get great turn outs and a huge varity of skylines with a good bunch of people.

Yo James are you getting another sky? I heard you sold the white one from Ben

Was good seein ya briefly on freeway the other week as well :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
×
×
  • Create New...