Jump to content
SAU Community

Recommended Posts

Hi all, I am currently looking into buying a V35 Skyline Coupe 03-04 model, and i would just like to know if the factory "BOSE" sound system is any good??? Having previously owned both 33 and 34 skyline , which somehow luckily all came with big aftermarket sound systems installed by prevouse owners, (headunit, amp, big sub speakers) setup, i just want to know if the factory setup on the v35 are decent enough? thanks

Link to comment
https://www.sau.com.au/forums/topic/372460-v35-sound-system-question/
Share on other sites

I like my Bose system, does what i need it to. Keep in mind (From what i can see) the V35 has 4x 6 inchers, 2 with tweeters (Front and mid), and 2x 6x9's at the back. (might be wrong about this). I also use a 7" touch screen Double Din system with built in blutooth etc. Really happy with the system in general. My previous car had a full aftermarket Pioneer system and this blows it away.

Bose make the speakers for the car so all the harmonics are as close to perfect as you could like.

I am happy with the BOSE.

I use a Computer as my "Headunit" and have a 31 band digital / software equalizer to tailor the sound for the car. Being able to finely control the Eq has really made a difference.

For the highs (ie >15khz), I think most of these are lost due to the fact I am actually playing MP3's, I dont know if the BOSE would actually handle them. But with the eq, its enough for me.

The weekness I would have to say is actually in the true sub-woofer range. The bass can be pushed pretty hard, but to me the crisp kick of bass is not as good as I hoped for, but still much better than your average sound system. I do like to feel my bass; no, not "doof doof", but the "kick". But to give you an idea, when a good song comes on, and I turn up the volume just a little, it doesnt take much to get the rearvision mirror bouncing along to the tune.

Depends on how serious you are about your sound, It won't sound anything like the systems in your previous vehicles.

You could keep the head unit so it looks factory but if you did I would consider an aftermarket processor like the Audison bit1/Rockford 3sixty/Alpine PXA-H800/JBL-MS8 to get a clean signal to your amp/amps if you go down that path.

Do some research on Mobile Electronics Australia, You'll get plenty of local advice on car audio.

Alternatively have a look on DIYMA in the US where there are plenty of instals in the G35

Depends on how serious you are about your sound, It won't sound anything like the systems in your previous vehicles.

You could keep the head unit so it looks factory but if you did I would consider an aftermarket processor like the Audison bit1/Rockford 3sixty/Alpine PXA-H800/JBL-MS8 to get a clean signal to your amp/amps if you go down that path.

Do some research on Mobile Electronics Australia, You'll get plenty of local advice on car audio.

Alternatively have a look on DIYMA in the US where there are plenty of instals in the G35

i upgraded the head unit to a dvd touch screen jvc, and added a 500w mono block amp and 2 s type alpine subs, but left the factory bose speakers and amp, it sounds great, the speakers themselfs when hooked up to an aftermarket deck with a crossover to remove the real low end and push that through the sub are as good as any $200-300 set of aftermarket speakers.

are as good as any $200-300 set of aftermarket speakers.

LOL that's not an indication of quality. If you'd compared them to a $900-$1500 set of speakers then you'd have reason to claim they are good. I've seen and removed the factroy speakers and I don't rate them highly, but to most who really don't care that much about quality audio OR who have not actually experienced a really good sound system then the stock speakers may be quite adequate. Some of the more frugal Doof Doof crowd fit into this catagory as well, more emphasis on bass and less need for quality up front means the factory speakers may be fine.

LOL that's not an indication of quality. If you'd compared them to a $900-$1500 set of speakers then you'd have reason to claim they are good. I've seen and removed the factroy speakers and I don't rate them highly, but to most who really don't care that much about quality audio OR who have not actually experienced a really good sound system then the stock speakers may be quite adequate. Some of the more frugal Doof Doof crowd fit into this catagory as well, more emphasis on bass and less need for quality up front means the factory speakers may be fine.

you can lol all you want, my last car had q line mb quarts, yes they where much better, but what im saying is so many people upgrade to basic pioneer or kicker splits and these people are not gonna see any gain with that money spent, simple as that, if you have a budget to buy mb quart, focal or other brands like that you wouldnt ask questions about stock speakers period... so instead of laughing at genuine comments make sure you take them in the context they where written in, and don't be a douche.

Edited by bigdr33gtst

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are a few different ways of doing it. I'm currently running two 1000cc pre-TB nozzles and PWM the pump for control. I'll be moving over to a constant pressure system and direct port. I'll run the pump off a regular relay, have it cycle on roughly 5psi before I start injecting to build pressure and then PWM a WMI solenoid (It's basically an injector that can take a lot of pressure and not corrode with water and meth.) The solenoid feeds the 6 direct port ~200cc nozzles. I'll also keep one ~250cc pre-TB nozzle to help keep IAT's in check.  Safety will be a little different as well. I used to use a pressure switch but will be moving over to a pressure sensor between my solenoid and nozzles. I'll trigger my solenoid and if I don't see specific pressure within a specific timeframe (e.g 100psi within a second, 175psi within 2 seconds), I kill it and revert back to non WMI maps the same way I did it before with 4D in Haltech. I was just figuring out the timers in my ecu last night. They made that a little more complicated than I would have liked... I wish Haltech offered a larger set of logic/math functions like other ecu's do. I can't do very much with just AND's and OR's.  I've been asked to do fuel/ignition mapping on a medium bore engine at work in May (192L V16). Being the only programmer in my region and having went and opened my mouth about knowing the ins and outs of fuel/ignition mapping, I have now been deemed an expert. Fun fun. The entirety of the logic and algorithms are programmed in C on a PLC. As I spend more time figuring it all out, I like what I see and eventually I may consider doing the same as a pet project to replace my ecu.   
    • This would be interesting, would you feed it via a 2nd row of injectors? Or just usual WMI nozzles?
    • Cut sump up and extend. Win win 😂 
    • All, What's the recommended torque for the 1/2 head studs for RB30 twin cam conversion with RB26 head?  
    • also, we need to know which solution worked....
×
×
  • Create New...