Jump to content
SAU Community

Widebody Guard Choices For R33

Run-It-Hard
 Share

Recommended Posts

Run-It-Hard Veteran

Run-It-Hard

Posted
Posted

Hey guys,

I just picked up a shmick R33 which happens to have origin front guards and standard rears. So now I'm on the hunt for some nice wide rear guards to complete the look.

I know Viva garage make a set of 25mm GTR style guards but I'm after something in the 40-50mm region, I know some are running around but I can't find shit at the moment.

So anyone on here know where I could source a set of funky guards?

There's an abundance of front guards but stuff all rears, odd that.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/372679-widebody-guard-choices-for-r33/
Share on other sites
045HOW Mentor

045HOW

Posted
Posted

There's an abundance of front guards but stuff all rears, odd that.

Not really. once you go wider than GTR it seems to prove difficult to keep it looking like a 33 and not a big POS. 32 can have guards the size of horses and still look like a 32 but 33 doesn't really like widebody as Much as would be liked.

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

I think there was some sarcasm involved there :P

If you can find some bad ass wide rear guards let me know! I want to run 18x10 +22 with some 265 tyres and that's just not going to happen with stock guards.

Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted (edited)

You will need MUCH tougher sizing then 18x10 +22 if you are putting such large guards on there.

Your regular cheap chinese wheel (Drift-Tek, Speedy Cheetah, G.Max whatever etc.) come in 18x9.5 +~35 and fit in stock guards no wuckin' forries. 18x10 +22 is only ~19mm further out then those and you want 40-50mm wide fenders? You will want at LEAST 18x11 0P on the back to pull the look off properly.

Food for thought ;)

Edited by Hank Scorpio
Run-It-Hard Veteran

Run-It-Hard

Posted
  • Author
Posted

f**k spacers!

Negative offset is where it's at!

Shame my drifteks will look like poo with wide guards .... Bummer.

Yeah still no luck other than the GT-R style and Cross factory. Might just settle for the GTR style so it's cheaper to replace when the car goes into a wall.

045HOW Mentor

045HOW

Posted
Posted

my original post still stands.

I don't know shit about fitment but im led to believe that you are pretty hard pressed to find any reasonable sized aftermarket rim that won't fit under GTR guards thus negating needing anything wider. of course there are some retarded dishies out there but you get what i mean.

This is pretty much the ONLY! Widebody R33 that I've ever seen that looked the goods and made me froth!

Thing thing struggles to have rims that look even close to normal.

Run-It-Hard Veteran

Run-It-Hard

Posted
  • Author
Posted

Stupid questions for the day are ;

1. What are they made of?

2. Are they legal to put on your 33 in australia?

Thanks,

Fibreglass

I don't see why not, I know in NSW you must keep original guard if adding widebody (i.e can't just cut it to make wheel clearance, need to flare it out)

Run-It-Hard Veteran

Run-It-Hard

Posted
  • Author
Posted (edited)

those are some wide f**king guards! not a fan of that, looks all wrong, out or proportion.

I think I'll settle for the topstage 30mm rear guards pending price. they don't look too bad, hopefully they are "cheapish".

Cheers Elvis for letting me know, completely forgot about Topstage.

Edited by Run-It-Hard
  • 1 month later...
ShyBoi Mentor

ShyBoi

Posted
Posted

I've got GTR style rear guards, running 18x10 +18's and there's still too much gap on them...so if you were looking cross factory I'd suggest 18x12 depending on offset cause mine could use 18x11's to fill it out better.

25GTT Veteran

25GTT

Posted
Posted

Needs the rear wing removed and some hardcore bolt on spacers and would look good.

I still stand (said the same thing over the years) that GTN1K was the best looking wide bodied R33.

Amen, also FYI, his is the WiseSport wide body kit, costs a small fortune but damn GTN1K looked amazing. I was fortunate enough back in the day to have my skyline next to it at many a show. Actually now i think about it, its unfortunate..... how the F&*K are you meant to do any good next to that car!! :-)

Run-It-Hard Veteran

Run-It-Hard

Posted
  • Author
Posted

I've got GTR style rear guards, running 18x10 +18's and there's still too much gap on them...so if you were looking cross factory I'd suggest 18x12 depending on offset cause mine could use 18x11's to fill it out better.

Just cause your current wheels don't fit, doesn't mean a wider wheel will.

You can get a wheel in the same width, but a lower offset in order to fill the guard out.

Where did you get your guards from?

I've found some in the UK and NZ, just trying to sort out shipping at the moment.

PM-R33 Grand Master

PM-R33

Posted
Posted

Amen, also FYI, his is the WiseSport wide body kit, costs a small fortune but damn GTN1K looked amazing. I was fortunate enough back in the day to have my skyline next to it at many a show. Actually now i think about it, its unfortunate..... how the F&*K are you meant to do any good next to that car!! :-)

Yep absolutely gorgeous car. That Autosalon magazine with his car on the front was my favourite mag back in the day. Must have read his article 50 times.

That car still around or what happened to it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...