Jump to content
SAU Community

Recommended Posts

  • Replies 234
  • Created
  • Last Reply

Top Posters In This Topic

http://steamunpowered.eu/agreed-to-originbf3-eula-ea-may-collect-and-share-your-data/

Might change some people's minds I guess. Not that keen on d/l Origin now myself.

Edited by DivHunter

EULA don't actually hold any legal weight anywhere really, they are never tested in court because they would fail. However, their information gathering and sharing provisions are a worry.

But no longer for me, BF3 was a total waste of bandwidth. I don't pay for map packs, especially ones claiming to be new games.

Cancelled my pre-order, uninstalled BF3 + Origin.

Jacob don't be a sook you got owned at BF3 so you raged and uninstalled (comment not designed to start a flaming war just pointing out possibilities)

BF3 is a completely new game engine to BC2

Frostbite 1.0

Frostbite debuted in 2008 with Battlefield: Bad Company. It features HDR Audio, which adjusts different types of sounds' loudness and lets players hear important sounds clearly even if there are other noises being generated (for example, gunshot sounds are always louder than in-game music; the in-game music will lower in volume while shots are being fired), and Destruction 1.0, which allows the player to destroy certain objects, like walls.

Frostbite 1.5

The second version of Frostbite debuted with Battlefield 1943 in 2009. It improved on the in-game destruction capabilities with Destruction 2.0, allowing the player to destroy entire buildings instead of just walls. In 2010, DICE released Battlefield: Bad Company 2 using this version of the engine, which was the first game to bring Frostbite Engine to the Windows platform. The Windows version of the game has minor DX11 shader support; consequently, it doesn't take full advantage of the entire API. The multiplayer component of Medal of Honor also uses this version of the engine, though with limited in-game destruction capabilities.

Frostbite 2

A demonstration of quasi-realtime radiosity from the Frostbite 2 engine.

The next generation of Frostbite will debut with Battlefield 3. It will take full advantage of the DirectX 11 API and 64-bit processors,[4] with no support for DirectX 9 (nor, therefore, Windows XP).[5] It will also feature enhanced in-game destruction with Destruction 3.0, creating more refined physics than its predecessor. Additionally an important distinction on its naming is that Frostbite 2 is not called Frostbite 2.0.[6]

DICE has given several presentations on advances in their rendering technology:

source

But no longer for me, BF3 was a total waste of bandwidth. I don't pay for map packs, especially ones claiming to be new games.

Cancelled my pre-order, uninstalled BF3 + Origin.

LOL NOOB RAGE.

GG at judging it on it's beta you r tard. I thought it was a POS the first day, but it's really grown on me, and shows how far they've come since BC2 in terms of both gameplay and visuals. That said I've had to drop my voltages on my cards as well as the core clocks on them as it thrashes them as hard as Furmark, first app I've seen to do that. Kept having hard lockups until I did, and both cards sit on 63-69c!

I can't wait for the full game even more now

agree Bozo i dropped my CPU from 4.5ghz back to stock mainly due to cooling but in the game my cpu load is very high

i don't mind origin and battlelog

if you remember with BF2 if you crashed mid game you didn't receive your ranks and rewards with battlelog as soon as its awarded its on the website

Whats your battelog name Madaz? Mine's sherbert86.

Sorta considering buying a second 6950 over the next couple of months, I reckon it'll be pretty awesome to run this game on full graphics :)

I notice that my GPU sits on 100% load, 100% of the time with this game. CPU usage is about 70% average.

LOL NOOB RAGE.

GG at judging it on it's beta you r tard. I thought it was a POS the first day, but it's really grown on me, and shows how far they've come since BC2 in terms of both gameplay and visuals. That said I've had to drop my voltages on my cards as well as the core clocks on them as it thrashes them as hard as Furmark, first app I've seen to do that. Kept having hard lockups until I did, and both cards sit on 63-69c!

I can't wait for the full game even more now

If what they've regurgitated as the open beta was a closed alpha I'd let it slide.

Please enlighten us, what part of the gameplay has improved since BC2?

Also, my rage is pro.

Edited by DivHunter

Cpd - are they not allowing any more downloads?

Div Hunter - I'm not 100 percent sure what new things you are looking for, I have bc2 its ok I got bored with it a few months after getting it (the same will probably happen with bf3 also)

There seems to be a lot of emphasis put on team play I personally love the flash lights, lasers, don't like rockets but hey you can't love everything

Remember this is 1 map 1 gametype we will have coop modes also

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...