Jump to content
SAU Community

Recommended Posts

You can make one for about $0 - $10, if you're a bit handy. I saw a how-to on the forum a while ago. Did it differently to me (probably better lol) but was more involved.

Nissan will charge you about $90 for it, but if you pop off the plastic cover then stick some rubber or stiff foam around the edge to stop hot air getting in, you'll end up with the same result.

Of course it won't say "Poooowweeerrrr duct" for everyone to see when you open the bonnet......

Link to comment
https://www.sau.com.au/forums/topic/373116-want-a-part/#findComment-5955624
Share on other sites

You can make one for about $0 - $10, if you're a bit handy. I saw a how-to on the forum a while ago. Did it differently to me (probably better lol) but was more involved.

Nissan will charge you about $90 for it, but if you pop off the plastic cover then stick some rubber or stiff foam around the edge to stop hot air getting in, you'll end up with the same result.

Of course it won't say "Poooowweeerrrr duct" for everyone to see when you open the bonnet......

It will if you get a white texter and put it on there :D

Link to comment
https://www.sau.com.au/forums/topic/373116-want-a-part/#findComment-5955711
Share on other sites

You can make one for about $0 - $10, if you're a bit handy. I saw a how-to on the forum a while ago. Did it differently to me (probably better lol) but was more involved.

Nissan will charge you about $90 for it, but if you pop off the plastic cover then stick some rubber or stiff foam around the edge to stop hot air getting in, you'll end up with the same result.

Of course it won't say "Poooowweeerrrr duct" for everyone to see when you open the bonnet......

Yeah, try $180 :whistling:

dodgey DIY is not the look im after.... thanks anyway

Lol @ dodgy DIY...

Guess it depends on your skill level...

Go to a Nissan dealer and ask them for one; they'll happily unload your wallet for you.:thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/373116-want-a-part/#findComment-5956475
Share on other sites

Yeh for OEM you have no choice but nissan unless you can find one on ebay, you may be able to pick one up 2nd hand from the US on the ebays

Just did a search

http://www.ebay.com.au/itm/Airbox-G35-K-N-filter-Air-Box-OEM-/270781929440?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f0bdc57e0

thats all i could find.

Edited by T4NK
Link to comment
https://www.sau.com.au/forums/topic/373116-want-a-part/#findComment-5956903
Share on other sites

Yeah, try $180 :whistling:

Lol @ dodgy DIY...

Guess it depends on your skill level...

Go to a Nissan dealer and ask them for one; they'll happily unload your wallet for you.:thumbsup:

Yeh, pushing over 300kw with my dodgy diy duct. ;)

Link to comment
https://www.sau.com.au/forums/topic/373116-want-a-part/#findComment-5957282
Share on other sites

sorry i'll elaborate on that....

im not interested in the fictional power gain with this mod, am just in need of the OEM part that goes here

Umm, I'm confused. If it's a fictional power gain, why are you so interested? I'm not saying you will get much (if any) gain (as opposed to us M35 owners), but wouldn't you like to try a zero cost mod to see before being touched up by Nissan or anyone else?

If it's only about the looks, put the money towards something that can be seen on the outside IMO.

Link to comment
https://www.sau.com.au/forums/topic/373116-want-a-part/#findComment-5958308
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
    • 😜 hopefully we get this instead of a new R36 GTR due to recent financial problems at Nissan. Nismo to sell a complete kit with RB26 and driveline. All starts making sense (ok maybe not) once the Nissan Leaf's (Leaves?) with stuffed EV motors/batteries hit the market cheap
    • Hi guys , have had allot of time for SAU and has helped me out heaps in the past so I thought I would give it a go , I have my QM1 white NUR for sale 1 of 156 examples built by Nissan. Serious personal messages please if interested and details will be provided , asking 500k 
×
×
  • Create New...