Jump to content
SAU Community

Recommended Posts

The shift times are only half affected by the valve body, the auto controller is very slow in sending the signal to the VB and sends a ramped voltage, especially to the lock up clutch. Opening the valve body does make it quicker and firmer once the voltage is there and allows more pressure to be run if needed but it wont make the shifts instant when you hit the switch.

I don't think mine has that much of a pressure increase from stock as the extra clutches allow sufficient torque transfer at the moment.

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

I went for a ride in Aarons, but didn't get to drive. It felt a lot better than mine, but I'd imagine it'd feel even better when you're driving.

I'd be interested to see how the Trans Go version compares to the RVO version Aaron has. I think the RVO one was cheaper too wasn't it?

From memory it will be about the same price depending on how much I get the Kit's for and depending on what deal you get from RVO.....I nearly did the RVO but I changed my mind as I preferred the Transgo spec!

Either kit is fine though....Aaron and Jethro are quite happy with theres and they are putting out good numbers.

I went for a ride in Aarons, but didn't get to drive. It felt a lot better than mine, but I'd imagine it'd feel even better when you're driving.

I'd be interested to see how the Trans Go version compares to the RVO version Aaron has. I think the RVO one was cheaper too wasn't it?

the only comparison I have is with scotss. but his is a built box, so its very different.

If Aarons kit is just upping the pressure I would assume that could limit the life and reliability of the trans, unless the pressure hasn't been lifted too much but then it might not get the desired results. Its definitely better to go a modified valve body than just upping the line pressure. From what I know thumbsup.gif

a shift kit isnt just upping the pressure. its a shift kit.

Rvo make their own kit with a spinning lathe and other tools. which is why its alot cheaper than the transgo

From memory it will be about the same price depending on how much I get the Kit's for and depending on what deal you get from RVO.....I nearly did the RVO but I changed my mind as I preferred the Transgo spec!

Either kit is fine though....Aaron and Jethro are quite happy with theres and they are putting out good numbers.

this.

people will prefer trango for the name, and back up they get from the public. If i didnt find RVO(and didnt wanna be a test mule) I would have gotten a transgo kit.

but as said, Jethro and myself are happy with the RVO kit.

the only comparison I have is with scotss. but his is a built box, so its very different.

a shift kit isnt just upping the pressure. its a shift kit.

Rvo make their own kit with a spinning lathe and other tools. which is why its alot cheaper than the transgo

How much cheaper?

can you tell us what RVO do to make the shift kit work....and I'm not being a smart arse.

guy's below is a short read for you....just so that you know why the shift kit is important when you do start winding up the power......no pun intended with the Transgo site either!

http://www.txchange.com/transgo.htm

How much cheaper?

can you tell us what RVO do to make the shift kit work....and I'm not being a smart arse.

guy's below is a short read for you....just so that you know why the shift kit is important when you do start winding up the power......no pun intended with the Transgo site either!

http://www.txchange.com/transgo.htm

ill give em a call and find out exactly what they do.

but when i was looking for transgo shiftkit installs at the time I was doing it, the cheapest quote i got was something like $850 where as RVO virtually halved the price so yeh give me ten minutes lol

ill give em a call and find out exactly what they do.

but when i was looking for transgo shiftkit installs at the time I was doing it, the cheapest quote i got was something like $850 where as RVO virtually halved the price so yeh give me ten minutes lol

I know what you are talking about with the pricing....I got quoted a supply and fit for the Transgo from my gearbox place of $850.

Kit in Australia(And he has dropped his price $150 from last weekdry.gif) : http://www.ebay.com....c#ht_2769wt_907

Kit out of the US: http://www.ebay.com....b#ht_1336wt_907

Edited by Jetwreck

I know what you are talking about with the pricing....I got quoted a supply and fit for the Transgo from my gearbox place of $850.

Kit in Australia(And he has dropped his price $150 from last weekdry.gif) : http://www.ebay.com....c#ht_2769wt_907

Kit out of the US: http://www.ebay.com....b#ht_1336wt_907

yeh i think the Aus one is what i found when i was doing mine. but if you guys prove the transgo to be the goods, and i decide to keep the stag, i might convert

I know what you are talking about with the pricing....I got quoted a supply and fit for the Transgo from my gearbox place of $850.

Kit in Australia(And he has dropped his price $150 from last weekdry.gif) : http://www.ebay.com....c#ht_2769wt_907

Kit out of the US: http://www.ebay.com....b#ht_1336wt_907

Whats the diff between the US one and the one from your OP? Why is there a price difference (not having a go - just curious)

You spending cash for no reason again Aaron? :rolleyes:

if i keep the car. might as well

Whats the diff between the US one and the one from your OP? Why is there a price difference (not having a go - just curious)

there is no difference, which is his point lol

I know what you are talking about with the pricing....I got quoted a supply and fit for the Transgo from my gearbox place of $850.

Kit in Australia(And he has dropped his price $150 from last weekdry.gif) : http://www.ebay.com....c#ht_2769wt_907

Kit out of the US: http://www.ebay.com....b#ht_1336wt_907

i thought we were talking about this.

Hmmm, let me see. $320 or thereabouts for a transgo kit delivered from the US- takes about a week to WA.

Or $650 for a transgo kit delivered from over east- takes about a week and a half usually....

So, save myself over $300 and get it quicker? Decisions decisions....

Story of our lives. When I converted my arx to a normal stereo after the bose stuffed up, I needed a standalone AC controller board. $550ish from Nissan here- and they'd have to order it in. OR less than $200 delivered from a dealer in the US and it arrived within a week. Unfortunately companies set their prices per country according to sales volume- we simply don't have the volume here to compete price-wise with internet sales from the US.

Whats the diff between the US one and the one from your OP? Why is there a price difference (not having a go - just curious)

i thought we were talking about this.

Jethro can correct me if I'm wrong, but I think is point was why is there a price difference between the US ebay one and the one in the OP. There's probably a very good reason for this that I have no idea about... something missing no doubt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I'm not clicking on a link to f**king bookface (never have, never will), so I can't really know what the complaint here is about, but.... There's nothing particularly wrong with forcing people to have a higher license category to drive super/hypercars. Note that the laws are not about modified cars - only listed standard cars, because there are not supposed to be cars modified enough to meet the law's category limits anyway. If you have a modified car that falls into those power limits you're already in trouble anyway. What is wrong is the bullshit on-line "test" to get the upgrade, instead of any actual work and training.
    • Meh Don't have Facebook anymore but watched a YouTube about it, they also talked about them not being able to use and "sports" modes, not really sure how they would enforce that apart from logging the Db for the cars that have exhaust valve activation in sports mode Apart from all the high end sports cars and supercars that make the sort of power they are talking about standard, I cannot see it bothering anyone else, unless of course road side tests now include having a dyno and scales on site to test the power output vs weight What is it? 500hp per ton? And if the only additional cost is $60 or so, as the video stated, I cannot see that being a war stopper for the people that outlay a few hundred thousand dollars on a performance car In fact, I see it would be a ego boost for some, because they have a "special" drivers licence for a "special"person with a "special" car And if I did have a modified car that made over the limit, there's no way in hell I would apply for a "special" licence, I could see the authorities checking your licence against your rego, so if old mate applied for a licence, but owns a, say, R33 Skyline, that may trigger an inspection of said car as to why, and how, that old mate has a R33 that would fit the bill of making over 500hp per ton Again, meh, not something I believe will be a real issue to 99.9% of people
    • https://www.facebook.com/groups/mechanic.com.au/permalink/2029367984190485/?   Here we go…. 😢
    • Hi, I'm a new member who has been lurking for a while. Ive been looking to buy an R32, 33 or 34. GTT/GTST for some time now. I'm close to pulling the pin on one,. My question is around roadworthy certificates in Victoria. What can you get away with as far as mods go?  Would a car pass RWC with a haltech dash, aftermarket manifold and high mount turbo as long as ride height and noise was ok? I come from a muscle car background, I'm learning more about our beloved Skylines as I go. I don't want to drop my savings on something to find out I need thousands to get it on the road. Cheers for any input/advice.  
    • The first year I did Putty Road I was driving the old Honda Jazz work car. Being the rear vehicle of the 2nd or 3rd group to make sure no one got lost. The GTRs in front couldn't work out how I "was with them in the twisties"... They didn't like it when they found out I was only cruising and chilling in the Jazz like it was a Sunday drive with my Nan in the car.
×
×
  • Create New...