Jump to content
SAU Community

Recommended Posts

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

What was it like to fit? Fitting instructions included?

bit of a PITA....I am sure after I do the next 2 things will be a lot easier..........destructions come with it.

Edited by Jetwreck

you don't even notice the shifts on light throttle

.........full throttle there is no clunking or harshness.....just super fast and precise!.....keeps the power rolling.

My gearbox would not change into 3rd at all unless you completely backed off and 2nd was flaring.....now it shifts without even thinking about it.

P.S. I have to admit at about half way I was a bit scared about the thought of drilling ect....didn't help that all the workshop guy's were laughing at me and saying they would not even attempt it.

Edited by Jetwreck

Do the changes on full heavy/full throttle too hard or chirp tyres on changes at all?

Sorry for all the Qs just chasing as much info and still trying to understand MV's decision on the kit.

no chirping and no destructive gear changes anywhere......I am putting out over 270AWKW's and I had no issue's.

I would agree.. the more I read the more frightened I became.. Solution.. stop reading. lol

Completely right. Only start reading when you've cracked it open & there's no returning. So, are you going to tackle this as a DIY?

I've started ringing around my local guys to see who sounds most confident & if they can do it for less than ~$250 - 300, this will be my first non DIY mod :O .

Well, I heard back from a shop that does a lot of Transgo work. His sugestion was for me to buy the kit online (derr, was going to anyway) because he can't buy it that cheap thru his supplier.

Then his price for installation was somewhere between $500 & $1000 (unsure as to the extent of the work) but that included filling it up with their Valvoline trans fluid. I DON'T THINK SO. :spank:

Looks like I keep asking or another DIY project is on the cards.

Well, I heard back from a shop that does a lot of Transgo work. His sugestion was for me to buy the kit online (derr, was going to anyway) because he can't buy it that cheap thru his supplier.

Then his price for installation was somewhere between $500 & $1000 (unsure as to the extent of the work) but that included filling it up with their Valvoline trans fluid. I DON'T THINK SO. :spank:

Looks like I keep asking or another DIY project is on the cards.

$500 for fitting including the fluid isn't that bad I wouldn't think? And I've had no issues with the Valvoline trans fluid, just make sure they're using the Maxlife version, as that is the Matic J compatible one.

Anyone got a link for the fitting instructions? There are videos on the web site but I can't find the exact fitting instructions. If it's not too bad I'll just get dad to do it.

I take it this is where the price difference comes in for Craig's changeover VB. Worth it if it's going to be a hassle!

Well, I heard back from a shop that does a lot of Transgo work. His sugestion was for me to buy the kit online (derr, was going to anyway) because he can't buy it that cheap thru his supplier.

Then his price for installation was somewhere between $500 & $1000 (unsure as to the extent of the work) but that included filling it up with their Valvoline trans fluid. I DON'T THINK SO. :spank:

Looks like I keep asking or another DIY project is on the cards.

$500 for installation and Oil is a good price imo......but no more than that!spank.gif.......it's about 4 hours work with the correct tools.....but 1 stuff up and your screwed!

try this when pricing......tell them it's a 350Z auto...that they will understand...it's the exact same shit.

http://g35driver.com/forums/engine-drivetrain-forced-induction-diy/313499-diy-transgo-valve-body-upgrade.html?ref=esp-link

have fun!!! :P

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have one of these! It is absolutely useless. It provides not nearly enough force on the bolt, it just slips over anything that is not finger tight. And if it's finger tight, you can use your fingers.
    • You have to take photos of the car in Victoria with a timestamp. So if you have big aftermarket turbo in your engine bay, your car is simply not getting a RWC and you'll be doing a lot of returning to stock, and re-modding after about 90 days (because cars that have had a RWC can be audited after the fact). The law I'm kinda ambivalent about. I can see the logic and the writing on the wall, Cobb etc would be well known for selling to 'wink wink off the street usage' but in the real world everyone knows what they do and where they end up. It'd be like someone selling guns in Australia but "only to people who have a proper licence" but selling them outside of Bunnings instead of sausages to anybody. Like RWC's, and VASS's and EPA, this is enforcement of the actual existing rules. I haven't looked into it but there (should) be a way for people to legally pass their tuned car to be within the rules if they can prove they pass emissions laws that are applicable. If there's not then that's another story.
    • Interesting post(haven't watched the vid). I'm surprised companies can be fined for selling products that are specifically meant for certain applications.  How can you force a customer to use or apply your products in 100% the way intended? People have been misusing products since they were invented. Heck, I ate dessert last night with a soup spoon. Does that mean the spoon manufacturer could be fined? And what of the customers who actually want to use the product for its intended use?   I'm sure we could discuss and debate this for a while, but this is an introduction thread and I dont mean to take over it.
    • I think depending how much left over cash I have after all the kids and wife (daycare, extra curriculum activities, toys, and whatever they drain from my account, wife's spending, etc.) I might go for the Advan A052 OR if the bank account says no, then Nankang CR-S.  
×
×
  • Create New...