Jump to content
SAU Community

Recommended Posts

Heya all,

Seeing as most of Australia has now become rain drenched, driving on wet roads is almost a daily event. Ive noticed in recent months my R34 loves to aquaplane at the slightest (smallest) build up of water on the road.

Last night on the freeway at 110 or a lil less the car constantly tried going sideways again in the rain (mostly higher freeway speeds it always happens but it can happen at just 60ks too)..... finally its made me ask the question;

Does anyone have any advice on how to reduce aquaplaning in a car, mebbie specific to Skylines or is it an R34 thing? Or aquaplaning in general. I used to try to 're steer' (if that makes sense) when the car takes off in the front end, but that makes it worse i find, now i dont touch the steering wheel as the car aquaplanes and i find it grabs traction again and self corrects but its a bit freaky..... There has to be a better way to reduce the effects of aquaplaning.... surely ? How do racing cars do it? I recently saw a porsche that crashed on the news after it aquaplaned killing the two people inside. I know ive come close to all loss of control too. Any Advice is welcome. Thanks in advance.

Edited by nathanau
Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/
Share on other sites

Heya check tyres for what ? besides the obvious poor tread ( mine r in excellent condition)

What type of tyres you got?

Will help if you got a set of tyres that have good wet weather rating...

Hard and Soft tyres (as in rubber type) can make a difference too.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5954905
Share on other sites

run tyre pressures UP 10 + lbs more then than normal

That's going a bit overboard. 2-3 psi would be more than enough.

Make sure you have enough tread on the tyres will obviously help - aids in dispersing the water from under the tyre.

Can't recall ever having a problem with aquaplaning (R32), running both Bridgestone Potenza and various Falken tyres. The crap Maxxiss on my Falcon are another thing all together.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5956123
Share on other sites

tyre compound plays as big a part as tread depth, and tread pattern plays a big part too, especially if you have directional tyres and have rotated them yourself and put them on the wrong side. size also plays a big part. if you have wide tyres then they will aquaplane more than skinnier tyres.

and +1 for altering tyre pressure.

having said all of that, i've had some pretty shitty, almost bald tyres on cars before and never had any issues with aquaplaning. had a few moments where it's been close in absolutely pissing down rain though. maybe it has something to do with driving style as well.

oh and you don't use tyre shine by any chance do you? if you do, do you put any on the tread of the tyre? cause that's a big no no.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5956140
Share on other sites

Damn, everything I wanted to say was mentioned lol.

But I have to reinforce, if you're not in complete control of the car, slow it down. It's just not worth it if things go wrong. Bad tyres, poor tread, low pressures, all make a pretty big difference. But there's nothing more important than driving to the conditions.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5958286
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You have the option to do this. Nobody but me ever did this (go slower, I mean) Everyone seems to fall victim to "This would be a great setup for you, but for me, I need a little more power..."
    • Save yourself the headache of an alarm. Immobilizer on the signal side of the main EFI relays so it won't start is good enough. DIY killswitch is the same thing except instead of a nice passive system you need to remember to switch it on and off.
    • Yeah, the advent of canbus was supposed to cut down on wiring weight, then some bright marketing wonk says "oh, look at all these wonderful tech gadgets we can cram in here now that we have this wonderous technology" and some arsehole safety legislator says "oh, look at all the wonderful surveillance and tracking gadgets we can cram in here now that we have this wonderous technology" and some dipshit young engineer who has grown up thinking that an extra 500000 lines of code is not a problem because storage is cheap these days says "oh look at all this wonderful shit I can do to one up those dipshit arsholes over at VW" and the Karens of the world all go "oh look at all these fancy things I can do on my screen (so long as I am not driving on a bumpy road wherein touch screens immediately become the single most stupid shit idea ever shoveled into a car) and my 19 zone airconditioning keeps my sweaty fat folds a bit less damp and the windows close themselves because I'm too fat and lazy to wind them up for myself and these reversing sensors would have been great if I'd paid attention to them instead of smashing them on the bollard while I was reversing and staring fixedly forward that day I went to pick up little Charlize from ballet" and the sweaty mongoloids who say "oh this wonderful collision avoidance technology with these 45 excellent radar antennae scattered across the front of my car mean I can tailgate like a methed up tradie at full speed with no fear because the car and the 35 airbags will protect me if it all goes wrong" ...... </shallistopranting?>
    • There's a post from a member (can't recall who), went down the path of a twin scroll G30-660 and it's doing over 300kW+ AND comes on about the same as a high flow RB25DET turbo. Have your cake and eat it too in this case. TBH, if I had a 2nd chance of building my car again (i.e. someone gave me what I wanted for my shit box, but the deal was I had to re-build another R33 and keep the change) I would just pop in a stock NEO motor (with new seals, rod bearings, ARP studs, head gasket, sump, Nitto pump), get a smaller twin scroll turbo, modify the stock low mount (keep the divider in place), and make a solid 300kW on 98RON and call it a day. 
×
×
  • Create New...