Jump to content
SAU Community

Recommended Posts

Heya all,

Seeing as most of Australia has now become rain drenched, driving on wet roads is almost a daily event. Ive noticed in recent months my R34 loves to aquaplane at the slightest (smallest) build up of water on the road.

Last night on the freeway at 110 or a lil less the car constantly tried going sideways again in the rain (mostly higher freeway speeds it always happens but it can happen at just 60ks too)..... finally its made me ask the question;

Does anyone have any advice on how to reduce aquaplaning in a car, mebbie specific to Skylines or is it an R34 thing? Or aquaplaning in general. I used to try to 're steer' (if that makes sense) when the car takes off in the front end, but that makes it worse i find, now i dont touch the steering wheel as the car aquaplanes and i find it grabs traction again and self corrects but its a bit freaky..... There has to be a better way to reduce the effects of aquaplaning.... surely ? How do racing cars do it? I recently saw a porsche that crashed on the news after it aquaplaned killing the two people inside. I know ive come close to all loss of control too. Any Advice is welcome. Thanks in advance.

Edited by nathanau
Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/
Share on other sites

Heya check tyres for what ? besides the obvious poor tread ( mine r in excellent condition)

What type of tyres you got?

Will help if you got a set of tyres that have good wet weather rating...

Hard and Soft tyres (as in rubber type) can make a difference too.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5954905
Share on other sites

run tyre pressures UP 10 + lbs more then than normal

That's going a bit overboard. 2-3 psi would be more than enough.

Make sure you have enough tread on the tyres will obviously help - aids in dispersing the water from under the tyre.

Can't recall ever having a problem with aquaplaning (R32), running both Bridgestone Potenza and various Falken tyres. The crap Maxxiss on my Falcon are another thing all together.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5956123
Share on other sites

tyre compound plays as big a part as tread depth, and tread pattern plays a big part too, especially if you have directional tyres and have rotated them yourself and put them on the wrong side. size also plays a big part. if you have wide tyres then they will aquaplane more than skinnier tyres.

and +1 for altering tyre pressure.

having said all of that, i've had some pretty shitty, almost bald tyres on cars before and never had any issues with aquaplaning. had a few moments where it's been close in absolutely pissing down rain though. maybe it has something to do with driving style as well.

oh and you don't use tyre shine by any chance do you? if you do, do you put any on the tread of the tyre? cause that's a big no no.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5956140
Share on other sites

Damn, everything I wanted to say was mentioned lol.

But I have to reinforce, if you're not in complete control of the car, slow it down. It's just not worth it if things go wrong. Bad tyres, poor tread, low pressures, all make a pretty big difference. But there's nothing more important than driving to the conditions.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5958286
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well, in 2007 he must have been charging about $1800 an hour. He only looked at the car for 5 minutes. And another 4 to write the report wrong, and another minute to correct it. Mind you, this was for a car that was: Stock engine, fmic (hole in drivers guard), all alloy intake and custom air box, 3 inch turbo back exhaust, lowered, and a set of 17" Advans (255/40/17 rear and 235/45/17 front). It was nothing crazy. The blue slipper wanted the "hole in the guard" engineered. But that was because he got the shits that I wouldn't "relocate the battery from the boot, back to the factory position in the engine bay"... In an R33 GTST...     Also for emissions, E85, and don't go wild on timing. It's amazing how the closer you get ignition timing towards max torque, the last couple of degrees really throw NOx counts right up. And for the huge increase in emissions, it's only a small increase in torque.
    • He'll be looking down and swearing about "the damn apprentice" for trying to convince Duncan to use percussive maintenance... 😛  
    • I swear at my GKTech ones every time I have to take them apart and replace a spherical. But I wouldn't swap them for anything else. They absolutely slay every other option, at least in terms of how they actually work. You sure you don't want to live with bearings? I mean, they don't have "ball bearings". They are rod ends and sphericals throughout. Tough as nuts, even though I have found more than one way to wear them out.
    • From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
×
×
  • Create New...