What Grease Do I Use

[luvpsi]

hey guys im about to replace my clutch what type of grease should i use on the mainshaft(spigot shaft) whatever you call it.

[OMGGTR]

nickel paste just dab a bit on the smooth part where u put the thrust bearing and move it bak and forward to get it going also wherever metal touches metal like the clutch fork onto the thrust bearing and the pivot ball.... if u want u can put a dab on the splines but that dont really matter....

u dont have to put anything on the spigot just sweat it .... simply place the bush on the table fill the spigot with oil to the top then squeese ur thumb down hard till u see the oil squirting out the bottom do this 2 times what this does is lubricate the bush so you dont have any issues

[luvpsi]

Where do I get some of this nickel paste

[r31slpr]

Your in Perth yeah? Try veale auto parts, few stores around, or supercheap, auto one, etc

[turboedsloth]

You could also use LMM grease, black grease. I use that and have never had any problems

[luvpsi]

my spigot bush is perfect order do i still have to replace it i never replaced it on my old commodore.

[r31slpr]

Usually a good idea to do the spigot at the same time just for piece of mind. they're pretty cheap so it will save you having to pull the box out again later to do it

[luvpsi]

This clutch is only a temp replacement