Jump to content
SAU Community

August 27Th Drift Practice - Entry Forms Inside

Mandi

By Mandi,
in Events

 Share

Recommended Posts

Mandi Contributor

Mandi

Posted
Posted

post-39350-0-47304000-1312886037_thumb.jpg

Okay boys and girls, this is it. The LAST drift practice day for 2011!!

This will be your last time to get out on the track in a non competition day. For anyone new to the sport wanting to have a go now is the time! Driver training and practice runs from 10am until 4pm Saturday!

As on the flyer $130 entry fee (CAMS and club membership - available on the day).

Baskerville Raceway is one of THE BEST drift tracks in Australia so take the opportunity to start learning on an ideal track!

AND an exciting new addition to the practice day time table, our Clerk of the Course has allocated 1 hour between 11.30am and 12.30pm during the next practice day/come and try day for sponsor rides. All sponsors must be proven to the Clerk of the Course to be legitimate sponsors and they must sign a Passenger Disclaimer before getting into the vehicle.

Drivers will also have the opportunity to ride together for training and development purposes throughout the day. All runs with passengers will be single runs. If you intend to put a passenger in your car you must declare this to the scrutineers at scrutiny and your car will be marked accordingly so that start line can identify those eligible.

It is important to note that a CAMS compliant roll over protection structure is a cage that satisfies the current FIA standards as found in Schedule J of the General Requirements in the CAMS Manual of Motorsport, which can be found here: www.cams.com.au or in the attached document.

You do not need to have your roll over protection structure certified and log booked to be able to take passengers on a drift practice day, it just needs to be CAMS compliant as per schedule J attached, and the scrutineers need to be satisfied that it is indeed compliant with the schedule. However, Drifting Tasmania recommends that you do have your rollover protection structure certified by registering your vehicle by way of a log book.

All information pertaining to the event is contained in the attached supplementary regulations, and I have attached some CAMS information regarding roll cages in vehicles ;)

Approved Supplementary Regulations.pdf

GQ11_Schedule_J_Q311.pdf

toffy Veteran

toffy

Posted
Posted

I'll be at the drift day with bells on!

You'll be easy to spot then :w00t:

:ph34r:

not sure i'll get the ceff ready as there's a fair smack of work to finish it off , and i have to find front rimzzzz now , but i'll be there to spectate if it doesn't go to plan

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

You'll be easy to spot then :w00t:

:ph34r:

not sure i'll get the ceff ready as there's a fair smack of work to finish it off , and i have to find front rimzzzz now , but i'll be there to spectate if it doesn't go to plan

bells will be on my nipples whistling.gif

I've got a pair of 17"x7 +38 if you want to borrow?

jack1 Newbie

jack1

Posted
Posted

hey all im pretty new to the scene so bare with me haha..

im a member of hscc but i havent got a cams license, is cams required to enter drift practice or is cams just required to compete?

how much is a cams license because if its required i might be a tightass and wait till next year and get my years worth.

cheers :cheers:

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

Hey Jack,

You can get a CAMS licence on the day, I can't remember how much it is exactly but I think it's like $110.

Your licence lasts for a year from the day you pay for it so you don't need to worry about buying it at the right time to get your years worth.

Hope that helps.thumbsup.gif

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted (edited)

Looks like I have to pull the pin on this one. My WRX is a spit of jealous rage stole all the money I had put aside for this event :(

Edited by zoidbergmerc
tweetywoof Collaborator

tweetywoof

Posted
Posted

When he got it, the tune was for the 2871r which it had before making 240kw, but was swapped for a gt-ss, but tune wasnt adjusted so was running mega rich and washed down the bores on the first motor, so he swapped the blocks with a healthy motor, had the tune touched up by a workshop (won't mention who) so was ment to be fine, then less than 1000kms later same thing happened... so motor came apart and got new rings etc, then went to pro auto for a new tune from scratch.... had some trouble with cams being dialed in so only made like 170kw... got all that sorted and then re-tuned with a t28 as the gt-ss blew, made 201 kw on a nice safe tune :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      full send the cnut, do this   fark the wrapping and/or stick on siet.
    • Dose Pipe Sutututu
      How "plug and play" is the Haltech Pro for R33 GTST

      By Dose Pipe Sutututu · Posted

      Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Ozdavroz
      R32 owner from ACT

      By Ozdavroz · Posted

      Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
    • The Bogan
      NC MX5

      By The Bogan · Posted

      From talking to the mx5 guys the NC doesn't actually need bonnet vents like the earlier NA and NB models, due to a better designed cooling system and undertray design There's plenty of them used as street cars and weekend track toys running anywhere from around 170 to 250kw with stock non vented bonnets, I initially was going to get some bonnet vents, but, as they are not actually required, I'll put vents on hold for a while and just monitor temps, though I do need to get something to actually monitor engine oil temps though, coolant temp can be pulled from the OBD2, but the oil gauge in the car is not actual oil temp, it is only a calculation based off coolant temp and RPM ☹️ They do recommend upgrading the radiator, which I have already done with a triple pass, and the only other thing they recommend for a street car is heat management, like I talked about above to protect bits in the engine bay from radiant heat, and to either replace the nearly 20 year old plastic coolant expansion tank, which I have done, or get a aftermarket alloy jobbie for some bling They did also say that if I wanted to track the car on occasion a oil cooler and sump baffle would be required, and as I already have had a sump baffle installed when the engine was out......... I'm going to get a oil cooler with a thermostat....... just in case I do eventually track the car, but probably not, but still maybe...🤪
    • ms33
      400R arch extensions.

      By ms33 · Posted

      Finally had these painted and fitted and pleased with the result. also managed to source 400R fender badges.    
×
×
  • Create New...