Jump to content
SAU Community

August 27Th Drift Practice - Entry Forms Inside

Mandi

By Mandi,
in Events

 Share

Recommended Posts

Mandi Contributor

Mandi

Posted
Posted

post-39350-0-47304000-1312886037_thumb.jpg

Okay boys and girls, this is it. The LAST drift practice day for 2011!!

This will be your last time to get out on the track in a non competition day. For anyone new to the sport wanting to have a go now is the time! Driver training and practice runs from 10am until 4pm Saturday!

As on the flyer $130 entry fee (CAMS and club membership - available on the day).

Baskerville Raceway is one of THE BEST drift tracks in Australia so take the opportunity to start learning on an ideal track!

AND an exciting new addition to the practice day time table, our Clerk of the Course has allocated 1 hour between 11.30am and 12.30pm during the next practice day/come and try day for sponsor rides. All sponsors must be proven to the Clerk of the Course to be legitimate sponsors and they must sign a Passenger Disclaimer before getting into the vehicle.

Drivers will also have the opportunity to ride together for training and development purposes throughout the day. All runs with passengers will be single runs. If you intend to put a passenger in your car you must declare this to the scrutineers at scrutiny and your car will be marked accordingly so that start line can identify those eligible.

It is important to note that a CAMS compliant roll over protection structure is a cage that satisfies the current FIA standards as found in Schedule J of the General Requirements in the CAMS Manual of Motorsport, which can be found here: www.cams.com.au or in the attached document.

You do not need to have your roll over protection structure certified and log booked to be able to take passengers on a drift practice day, it just needs to be CAMS compliant as per schedule J attached, and the scrutineers need to be satisfied that it is indeed compliant with the schedule. However, Drifting Tasmania recommends that you do have your rollover protection structure certified by registering your vehicle by way of a log book.

All information pertaining to the event is contained in the attached supplementary regulations, and I have attached some CAMS information regarding roll cages in vehicles ;)

Approved Supplementary Regulations.pdf

GQ11_Schedule_J_Q311.pdf

toffy Veteran

toffy

Posted
Posted

I'll be at the drift day with bells on!

You'll be easy to spot then :w00t:

:ph34r:

not sure i'll get the ceff ready as there's a fair smack of work to finish it off , and i have to find front rimzzzz now , but i'll be there to spectate if it doesn't go to plan

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

You'll be easy to spot then :w00t:

:ph34r:

not sure i'll get the ceff ready as there's a fair smack of work to finish it off , and i have to find front rimzzzz now , but i'll be there to spectate if it doesn't go to plan

bells will be on my nipples whistling.gif

I've got a pair of 17"x7 +38 if you want to borrow?

jack1 Newbie

jack1

Posted
Posted

hey all im pretty new to the scene so bare with me haha..

im a member of hscc but i havent got a cams license, is cams required to enter drift practice or is cams just required to compete?

how much is a cams license because if its required i might be a tightass and wait till next year and get my years worth.

cheers :cheers:

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

Hey Jack,

You can get a CAMS licence on the day, I can't remember how much it is exactly but I think it's like $110.

Your licence lasts for a year from the day you pay for it so you don't need to worry about buying it at the right time to get your years worth.

Hope that helps.thumbsup.gif

zoidbergmerc Mentor

zoidbergmerc

Posted
Posted (edited)

Looks like I have to pull the pin on this one. My WRX is a spit of jealous rage stole all the money I had put aside for this event :(

Edited by zoidbergmerc
tweetywoof Collaborator

tweetywoof

Posted
Posted

When he got it, the tune was for the 2871r which it had before making 240kw, but was swapped for a gt-ss, but tune wasnt adjusted so was running mega rich and washed down the bores on the first motor, so he swapped the blocks with a healthy motor, had the tune touched up by a workshop (won't mention who) so was ment to be fine, then less than 1000kms later same thing happened... so motor came apart and got new rings etc, then went to pro auto for a new tune from scratch.... had some trouble with cams being dialed in so only made like 170kw... got all that sorted and then re-tuned with a t28 as the gt-ss blew, made 201 kw on a nice safe tune :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      Hypergear Turbochargers and High flow Services Development thread

      By Dose Pipe Sutututu · Posted

      Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • hypergear
      Hypergear Turbochargers and High flow Services Development thread

      By hypergear · Posted

      I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • cardre
      My R32 Money Pit & The Headaches That Come With It

      By cardre · Posted

      Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Milkmun
      NC MX5

      By Milkmun · Posted

      Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
×
×
  • Create New...