Jump to content
SAU Community

Recommended Posts

Firstly, thanks to Scott for a few pointers (as usual).

It really is pretty simple - the hardest part for me was putting it back togather! :blush:

1. remove the 4 screws from under the wheel/dash

IMAG0524.jpg

2. The and bottom plastic cover can be detached. The just pop off.

IMAG0525.jpg

3. remove the right stalk by pressing in the clip (there's a corresponding one on the bottom of the stalk as wel)

IMAG0526.jpg

IMAG0527.jpg

4. remove the left stalk. Same deal as the right stalk except you need to unclip a wire harness. Use a flat blade screwdriver to press down the clip to undo the harness.

IMAG0528.jpg

5. undo the bolts which hold the instrument cluster to the dash. There are 4 bolts - two front and two back. Funny thing was I was missing a bolt - which is not surprising and confirms

that our cars (and most imports) are f**ked with either here or in Australia. Someone must've changed the dash and forgot a bolt :angry:

IMAG0534.jpg

IMAG0535.jpg

IMAG0537.jpg

6. Take the plastic cover off the ignition barrel. remove the two large harnesses which connects the instrument cluster to the car on the back. The whole dash/cluster should come out now.

IMAG0536.jpg

7. There are 4 screws (two front, two back) which needs to be undone; then undo the clips (there's a few of them) and the cluster should seperate from the dash.

put in your nismo cluster (or if your a dodgy prick...another car's cluster :whistling:)

IMAG0538.jpg

Then reverse the steps above to fit it all back.

Hope it helps!

Link to comment
https://www.sau.com.au/forums/topic/373536-m35-instrument-cluster-removal/
Share on other sites

Nice write up. Pictures really are worth a thousand words! Even though I have no immediate requirement to remove the instrument cluster, at least I know how. Thanks :thumbsup:

Thanks for that Jethro. I'm guessing my car will have all the bolts as it came here with 100,000 on the clock- unlike the 57,000 that most of them have (they must have a reflashing tool with the same k's on it over there!).

On that, are the k's determined by the dash- so now you have the k's from the nismo dash rather than your car?

Oh, and someone needs to cut their nails, talon-boy :rolleyes:

Thanks for that Jethro. I'm guessing my car will have all the bolts as it came here with 100,000 on the clock- unlike the 57,000 that most of them have (they must have a reflashing tool with the same k's on it over there!).

On that, are the k's determined by the dash- so now you have the k's from the nismo dash rather than your car?

Oh, and someone needs to cut their nails, talon-boy :rolleyes:

LOL...

The K's are stored in the dash...yes now I've gained 50k km on my car...

not that I care...not selling it anytime soon (the car that is)

Good idea. I wound the clock back on mine about 14k when I put the new dash in, but I'm thinking if I keep the original it should be ok when I sell it, as I can show them k's on both if necessary.

The car does look its age though, doesn't look thrashed, so I'm sure it's fine. Just need to recover the steering wheel.

  • 1 year later...

so i had some time to try replace my stock cluster with my nismo one... this guide was helping perfectly until i had to remove the ignition and surrounding plastic from the stock cluster underneath.

the bottom and side clips seem to come off easy but for all my trying the top clips will not come loose. I have stopped for now through fear of breaking something...

Did others have any issues with this step at all? I'm at a complete loss at what to do now...

Cheers

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not specifically the revamp Toyos. In the past I've used Nitto NT01s, which were essentially the same compound as R888 with a different pattern (that's what the internetz said, so just be facts). I did like the NT01, progressive fade, didn't go from grip to 0 grip in a split second. If you look at the serious street/track guys, most are either on Cup 2, A052, A050, AD09, CR-S or AR-1.  
    • I have one of these! It is absolutely useless. It provides not nearly enough force on the bolt, it just slips over anything that is not finger tight. And if it's finger tight, you can use your fingers.
    • You have to take photos of the car in Victoria with a timestamp. So if you have big aftermarket turbo in your engine bay, your car is simply not getting a RWC and you'll be doing a lot of returning to stock, and re-modding after about 90 days (because cars that have had a RWC can be audited after the fact). The law I'm kinda ambivalent about. I can see the logic and the writing on the wall, Cobb etc would be well known for selling to 'wink wink off the street usage' but in the real world everyone knows what they do and where they end up. It'd be like someone selling guns in Australia but "only to people who have a proper licence" but selling them outside of Bunnings instead of sausages to anybody. Like RWC's, and VASS's and EPA, this is enforcement of the actual existing rules. I haven't looked into it but there (should) be a way for people to legally pass their tuned car to be within the rules if they can prove they pass emissions laws that are applicable. If there's not then that's another story.
    • Interesting post(haven't watched the vid). I'm surprised companies can be fined for selling products that are specifically meant for certain applications.  How can you force a customer to use or apply your products in 100% the way intended? People have been misusing products since they were invented. Heck, I ate dessert last night with a soup spoon. Does that mean the spoon manufacturer could be fined? And what of the customers who actually want to use the product for its intended use?   I'm sure we could discuss and debate this for a while, but this is an introduction thread and I dont mean to take over it.
×
×
  • Create New...